Eiki XG-705A owner manual Wep

Page 93

11. Appendix

Infrastructure Mode:

When selecting LAN5 (factory default setting)

Check each item below in the Wireless Setting menu of the projector as follows:

*IP Address

No setting is required.

*Sub net

Should be same as the setting of the access point

*Gateway

Should be same as the setting of the access point

*Network Type

Should be the Infrastructure mode

*ESSID/SSID/IBSSID....

Should be same as the setting of the access point

Check the settings for projector Client computer

*IP Address

No setting is required. Automatically set as HDCP.

*Wireless Channel

Should be 11

*ESSID/SSID/IBSSID....

Is same as the setting of the access point?

*WEP

Should be disabled.

 

->To enable the function, set the WEP by the browser after the

connection is established.(Refer to 6. Configurations with Browser (p47). )

*When using LAN5, it is necessary DHCP/BOOTP server is under the environment enabling those servers communicate through networks. Some access points may have the DHCP function. For detail of the settings, refer to the owner's manual for the devices or consult a system administrator of the network.

Is the segment where the projector is installed different from the computer?

Specify IP Address directly on the optional setting. Refer to "4. Wired LAN Configuration" ➔

"Confirming the Operation" (p28, 29).

■Connection between computer and the projector via Wired LAN cannot be

established.

When selecting LAN1 (factory default setting)

Check IP address, Sub net and Gateway of the projector and computer. For further details of the configuration, contact your system administrator.

Is the segment where the projector is installed different from the projector?

Specify IP Address directly on the optional setting. Refer to "4. Wired LAN Configuration" ➔ "Confirming the Operation" (p28, 29).

About Settings for LAN Environment:

When setting LAN4 or LAN5, first, connect to the projector with easy settings and set with the browser. Or connect client computer to the projector in accordance with the factory default settings. Make detailed settings by the browser and then restore the computer for previous environment setting.

English

93

Page 92 Page 94
Image 93
Page 92 Page 94
Contents LAN adapter optionally available is required Network Set-up OperationFederal Communication Commission Notice ComplianceSafety Instructions USB Wireless LAN AdapterTrademarks and Copyright Table of Contents Change Configuration Set Restart Advanced SettingsSetting the Moderator Function Easy Settings for Moderator FunctionRequired Operating Environment for Computers Operating Environment and ConfigurationModulation Form Network Specifications of the ProjectorPage About LAN Functions ChapterAbout LAN Functions LAN Functions and the FeaturesImage Projecting System via LAN Flow of Image TransferAn Example of the Connection LAN Connection Modes Operate the computer mouse with the remote control Page Setup Procedures Setup Procedures Install the software on computersNetwork Configuration has completed Installing the Software Setup Procedures Names and Functions of the Operation Screen Network Connection Standby Display Names and Functions of the Operation ScreenParts Names and Functions of the Screen NetworkModule ClientAdvanced Settings NetworkModule Moderator Page Wired LAN Configurations Connecting to the LAN Line Wired LAN ConfigurationsNetwork Environment Settings Setting ProcedureWired LAN Configurations Confirming the Operation English User PIN Code Wired Factory Default See the menu aboveDNS Domain System Blank Password User PIN Code Factory Default Setting of the Wired LANPage Wireless LAN Configurations Attaching the USB Wireless LAN Adapter Wireless LAN ConfigurationsSetting the Network Environment Setting ProceduresWireless LAN Configurations Easy Setting Wireless Information Wireless Factory DefaultComputer environment and Wireless LAN connection Leap User Blank Password Wireless LAN Factory Default SettingsOperation of Network Viewer Configurations with BrowserBrowser Configuration Configurations with BrowserIntroduction Browser EnvironmentStarting up the Browser Information Screen of Wireless LAN Screen of Wired LANParameters and descriptions of Information Quick Setup One-byte characters. The name set here will be displayed on TCP / IP Name and the password Wireless SettingMail Have entered is displayed as . up to ASCII32 characters Admin PasswordUser PIN code Figure will be displayed as . The password consists Moderator Login PasswordMiscellaneous LAN1-5,.SIMPLE Change Configuration SetRestart Project the Image via the Networks Project the Image via the Networks Use the Moderator Function Moderator Function Use the Moderator FunctionPreparation Procedure for Using the Moderator Function Preparation for Using the Moderator FunctionRegistration of the Moderator Setting the Moderator FunctionRegistration of the Clients Participants Unregister from Moderator Status How to Use the Moderator FunctionProject the Clients Images Stop Projecting the Clients ImagesHow to Use Network Viewer Mechanism of NetworkViewer and the Flow of the Signal How to Use Network ViewerWireless LAN Infrastructure Communication Mode Wireless LAN AdHoc Communication ModeWired LAN Communication Mode OperationFunctional Conditions of FTP Server Which Provides Images Operating with the PJ Controller Projecting the ImageSpecify the FTP server to provide image data Operating with the Browser Refresh Operating with the projector Wireless LANSet timing to switch images in Auto play mode -240 sec Page How to Use the PJ Controller How to Operate How to Use the PJ ControllerInitial Settings Registering E-mail Address Mail SettingEnter the message to attach the E-mail Check Option itemsTurning on/off the projector Power & StatusCheck the status of the projector Input ControlPC adjustment System Adjustment Image Adjustment Screen Setting Select On to automatically set the PC adjustment Confirm the actual adjustment ServiceSelect Set Number and name the setting Save the setting SetLoading the Set Multi Control Turn on or off the projector Appendix Wireless LAN Connection cannot be established TroubleshootingAppendix Computer cannot connect projectorsWEP Projector / PJ Controller cannot be turned on/off Cannot start up the browserNetwork Viewer does not work with the projector operation Speed of playing back images are very slowTerminology Setting up the IP address with arp + pingcommand

XG-705A specifications

The Eiki XG-705A is a high-performance, versatile projector designed for various applications, ranging from corporate presentations to educational purposes. Known for its exceptional image quality and robust build, the XG-705A is a go-to choice for professionals seeking reliability and ease of use.

One of the standout features of the Eiki XG-705A is its powerful lamp, which delivers bright and vibrant images with a lumens rating that ensures clarity even in well-lit environments. The projector boasts a resolution of 1024 x 768 pixels, providing crisp images that enhance the viewing experience. This model is capable of projecting larger images without compromising on quality, making it ideal for larger venues.

The XG-705A employs advanced color technology, ensuring that colors are rich and accurate. Its high contrast ratio enhances the depth of images, resulting in superb visual performance that is vital for presentations and video content. The projector also supports a variety of image formats, making it compatible with different media sources.

In terms of connectivity, the Eiki XG-705A is equipped with multiple input options, including HDMI, VGA, and composite inputs, allowing seamless integration with computers, laptops, and media players. This extensive range of inputs makes it easy to switch between devices during presentations, increasing efficiency and ease of use.

The projector features integrated audio capabilities, providing sufficient sound quality without the need for external speakers during small to medium-sized meetings. For larger setups, audio outputs are available for connection to external sound systems.

A user-friendly interface and intuitive remote control add to the convenience of the XG-705A. The onboard menu system is easy to navigate, allowing users to adjust settings such as brightness, contrast, and aspect ratio with minimal effort.

Durability is another key characteristic of the Eiki XG-705A. Its rugged design ensures it can withstand the rigors of frequent transport and installation, making it suitable for rental or permanent installations. The projector's lamp life is impressive, reducing the frequency of replacements and ultimately lowering the total cost of ownership.

In summary, the Eiki XG-705A stands out in the projector market for its combination of brightness, versatility, and durability. With advanced color technology, multiple connectivity options, and ease of use, it is a reliable choice for anyone in need of a quality projection solution. Whether for business presentations or educational settings, the Eiki XG-705A is designed to deliver exceptional performance.
Top Page Image Contents