Eiki LC-SD15 Computer System Selection, Computer Input, Selecting Computer System Manually

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (The signal formats provided in this projector is shown on page 55.)

One of the following messages may appear when:

Auto	The projector cannot recognize the connected signal	PC System Menu
	conforming to the provided PC Systems. The
	message "Auto" is displayed on the PC System Menu
	icon and the Auto PC Adjustment function works to
	display proper images. If the image is not projected
	properly, a manual adjustment is required. (p27, 28)

-----There is no signal input from computer. Check the connection between your computer and the projector. (See " Troubleshooting" on page 50.)

Mode 1	The preset system is manually adjusted in the PC
	Adjust Menu. The adjusted data can be stored in
	Mode 1~5. (p27, 28)
	PC Systems provided in this projector is chosen. The
SVGA 1
	projector chooses a proper system provided in the
	projector and displays it.

The Auto PC Adjustment function operates to adjust the projector.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually PC System Menu

PC system can also be selected manually.

1	Press the MENU button to display the On-Screen Menu.
	Press the Point 7 8 buttons to move the red frame pointer
	to the PC System Menu icon.
2	Press the Point d button to move the red arrow pointer to
	the desired system and then press the SELECT button.

The PC System Menu icon displays the system being selected.

Systems on this dialog box can be selected.

Custom Mode (1~5) set in the PC Adjust Menu. (p27, 28)

Computer Input

25