Video Input
Input Source Selection
Direct Operation
Choose either Video or Computer by pressing the INPUT button on the top control or VIDEO or COMPUTER button on the remote control.
Before using these buttons, a correct input source should be selected through Menu Operation as described below.
Menu Operation
Top Control
|
| WARNING |
|
|
POWER |
| LAMP |
| |
|
|
| REPLACE |
|
|
|
| INPUT | |
ON - OFF |
|
|
|
|
E | – |
| V |
|
|
| O |
| |
M |
|
| L | MENU |
U |
| SELECT | U | |
L | M |
| ||
O |
|
| ||
V |
| E |
| |
|
|
| + |
|
Remote Control
Input Menu icon
Input Menu
INPUT button
Computer
Video
COMPUTER button
VIDEO button
1 | Press the MENU button to display the | |
| Press the Point 7 8 buttons to move the red frame pointer | |
| to the Input Menu icon. | |
2 | Press the Point d button to move the red arrow pointer to | |
| Video or Computer and then press the SELECT button. The | |
| Source Select Menu will appear. When selecting VIDEO, | |
| video input is selected. When selecting COMPUTER, go to | |
| Step 3 to select an input source. | |
3 | Move the pointer to a correct input source and then press | |
| the SELECT button. | |
| When the input source is connected to the | |
| ||
|
| COMPUTER / |
|
| |
|
| a |
| When the input source is coming from video | |
Component | ||
|
| equipment connected to the COMPUTER /S- |
|
| |
|
| VIDEO / COMPONENT IN with a Component- |
|
| VGA Cable, select Component. |
| When the input source is coming from video | |
RGB (Scart) | ||
|
| equipment connected to the COMPUTER / S- |
|
| |
|
| VIDEO / COMPONENT IN with a |
|
| Cable, select RGB (Scart). |
✔Note:
•
Move the pointer (red arrow) to Computer and press the SELECT button.
Computer
Source Select Menu
Move the pointer to
32