Computer Input
Auto PC Adjustment
The Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Auto PC Adjustment function can be operated as follows.
Direct Operation
Remote Control
The Auto PC Adjustment function can be operated directly by pressing the AUTO PC button on the remote control.
AUTO PC button
Menu Operation
PC Adjust Menu
| Auto PC adj. |
1 | Press the MENU button to display the |
| Press the Point 7 8 buttons to move the red frame pointer |
| to PC Adjust Menu icon. |
2 | Press the Point d button to move the red frame pointer to |
| Auto PC adj. icon and then press the SELECT button twice. |
To store the adjusted parameters
The system parameters adjusted in the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in the PC System Menu (p25). See “Store” on page 28.
✔Note:
•Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly, manual adjustments are required (p27, 28).
•The Auto PC Adjustment cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i, or 1080i is selected in the PC System Menu (p25).
PC Adjust Menu icon
Move the red frame pointer to the Auto PC adj. icon and press the SELECT button.
"Please wait ..." message appears while Auto PC Adjustment is in progress.
26