Computer Input
Display area
Press the SELECT button to display the Display area dialog box and select the resolution.
Display area H
Adjust the horizontal area displayed by the projector. Press the Point 7 8 buttons to decrease/increase the value and then press the SELECT button.
Display area V
Adjust the vertical area displayed by the projector. Press the Point 7 8 buttons to decrease/increase the value and then press the SELECT button.
Full screen
With this function on, SXGA image is fully displayed at 4 : 3 aspect
ratio. It is displayed at 5 : 4 aspect ratio with this function off.
Reset
To reset the adjusted data, select Reset and press the SELECT button. The confirmation box will appear and then select [Yes]. All adjustments return to their previous figures.
Mode free
To clear the adjusted data previously set, move the red frame pointer to the Mode free icon and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button.
Store
To store adjusted data, move the red frame pointer to the Store icon and then press the SELECT button. Move the red arrow pointer to any of Mode 1 to 5 in which you want to store and then press the SELECT button.
Quit
Exit the PC Adjust Menu.
✔Note:
•Auto PC Adjustment, Display area, Display area (H/V), and Full screen cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC System Menu (p25).
Press the SELECT button at the Display area icon to display the Display area dialog box.
Display area
To clear adjusted data
Close this dialog box.
The confirmation box will appear and then select [Yes].
To store adjusted data
This Mode has the parameters being stored.
Vacant | Values of “Total dots”, |
| “Horizontal”, “Vertical”, |
| “Display area H”, and |
| “Display area V”. |
| The confirmation box |
| will appear and then |
| select [Yes]. |
28