CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 11 to 13 and connect properly.
COMPUTER INPUT 2 (DIGITAL/ANALOG)
Media Card Imager / Wireless Imager
/ Pj-to NetDirector TERMINAL
Connect computer output (Digital / Analog
Media Card Imager*, Wireless Imager* or
*optional accessories
MONITOR OUTPUT |
| COMPUTER INPUT 1 |
| COMPUTER AUDIO |
TERMINAL |
| TERMINAL |
| INPUT (1 and 2) JACKS |
Connect a monitor to |
| Connect computer output | Connect an audio output | |
this terminal. |
| (Analog HDB | (stereo) from computer to | |
This terminal outputs a |
| these jacks. | ||
computer input signal |
| from video equipment to this | (Refer to P12.) | |
(except Digital signal |
| terminal. (Refer to P12, 13.) |
| |
input on DVI terminal). |
|
|
|
|
(Refer to P12.) |
|
|
|
|
EXT. SP JACK (8 Ω)
Connect an external speakers to this jack. (Refer to P12, 13.)
✽Do not press this button. This button is used for our optional accessories.
COMPUTER IN 1
AUDIO IN 1 |
|
COMPUTER IN 2 |
|
DVI - I |
|
AUDIO IN 2 | RESET |
| |
| CONTROL PORT |
EXT. SP (8 Ω) | |
(STEREO) |
|
MONITOR OUT |
|
R – AUDIO IN – L (MONO) VIDEO | S – VIDEO |
| |
MCI / WI |
|
Y – Pb / Cb – Pr / Cr | USB |
RESET BUTTON
This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart the unit. Do not use RESET function excessively.
CONTROL PORT CONNECTOR
When controlling the computer with Remote Control Unit of this projector, connect the mouse port of your personal computer to this connector. (Refer to P12.)
Connect the
AUDIO INPUT JACKS
Connect the audio output from video equipment to these jacks.
(Refer to P13.)
●When the audio output is monaural, connect it to L (MONO) jack.
VIDEO INPUT JACKS |
| VIDEO INPUT JACK |
| USB CONNECTOR (Series B) | |
Connect the | component |
| Connect the composite | When controlling the computer | |
video output | from video |
| video output from video | with Remote Control Unit of this | |
equipment to connect the |
| equipment to connect | projector, connect USB port of | ||
component video outputs to |
| this jack. | your personal computer to this | ||
Y, Pb/Cb and Pr/Cr jacks. |
| (Refer to P13.) | connector. (Refer to P12.) | ||
(Refer to P13.) |
|
|
|
|
|
11