![](/images/new-backgrounds/1176062/17606271x1.webp)
SETTING
SETTING MENU
1 | Press MENU button and |
POINT LEFT/RIGHT button(s) to move a | |
| SETTING icon. |
2 | Press POINT DOWN button to move a |
| item that you want to set and then press SELECT button. |
Setting dialog box appears.
Language
Language used in
Keystone
When the image is distorted, select Keystone.
Store ··· Keep the keystone adjustment data even if disconnect AC Power Cord from an AC outlet.
Reset ··· Reset the keystone adjustment data when disconnect AC Power Cord from an AC outlet.
Correct keystone distortion by pressing POINT
UP/DOWN/LEFT/RIGHT button(s). Refer to KEYSTONE ADJUSTMENT on page 20.
Blue back
When this function is “On,” this projector will produce a blue image instead of the video noise on the screen when any input source is unplugged or turned off.
Display
This function decides whether to display
Off ···· sets
●
●“Power off?” message
Logo
When this function is “On,” projector displays our logo when starting up.
SETTING MENU
Set a red frame | SETTING Menu icon |
pointer to the item |
|
and press SELECT |
|
button. |
|
When pressing SELECT button at Language, Language Menu appears.
Move a pointer to the item and then press POINT LEFT/RIGHT button(s).
Ceiling function
Ceiling
When this function is “On,” picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounting the projector.
Rear
When this function is “On,” picture is left / right reversed. This function is used to project the image to a rear projection screen.
Rear function
36