Classe Audio cp-700 owner manual Specifications

Page 37

Specifications

All specifications are accurate at the time of printing. Classé reserves the right to make improvements without notice.

Frequency response

 

20 Hz – 200kHz ± 0.1dB

Distortion (THD + noise)

 

0.0012%

Maximum input voltage (single-ended)

5Vrms

Maximum input voltage (balanced)

10Vrms

Maximum output voltage (single-ended)

10Vrms

Maximum output voltage (balanced)

20Vrms

Gain range

 

-86dB to +14dB

Input Impedance (single ended)

100kΩ

Input Impedance (balanced)

200kΩ

Output Impedance

 

100Ω

Maximum Input to Noise Floor

120dB

Channel separation

 

130dB at 1kHz

Crosstalk (any input to any output)

better than -120dB @ 1kHz

Rated power consumption

42W

Idle power consumption

 

29W

Mains voltage

determined by the needs of country for which

 

 

 

the unit was manufactured;

 

Overall dimensions (preamplifier)

cannot be reset by dealer or user

Width: 17.5” (445mm)

 

 

 

Depth: 16.5” (419mm)

 

Overall dimensions (power supply)

Height: 4.75” (121mm)

Width: 5” (127mm)

 

 

 

Depth: 12” (305mm)

 

Net weight (preamplifier)

 

Height: 5.5” (140mm)

 

23lbs (10.5kg)

Net weight (power supply)

10lbs (4.6kg)

Shipping weight

 

45lbs (20.5kg)

For more information, see your Classé dealer, or contact:

Classé Audio

5070 François Cusson

Lachine, Quebec

Canada H8T 1B3

Telephone +1 (514) 636-6384

FAX +1 (514) 636-1428

http://www.classeaudio.com email: cservice@classeaudio.com

ENGLISH

Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved. i-Command™ is a trademark of Equity International, Inc. All rights reserved.

AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved. Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.

37

Image 37
Contents English Risk of Electric Shock Do not Open Important Safety Instructions Contents Welcome to the Classé family Word about installationPlacement Ventilation Custom installations Serial number Unpacking and PlacementOperating voltage Warm up/break-in period Please read this manual… Special Design Features Extensive listening tests Extraordinary longevity Robust, isolated power suppliesFront Panel Standby button & LED indicatorLCD touchscreen Menu buttonMute button Volume Knob Optional phono preamp Rear PanelTape Input Single-ended RCA inputsSingle-ended RCA main outputs Tape outputBalanced XLR main outputs RS-232 Control Port This DB-9connector has two purposesIR Input and Output Classé can Bus Control PortsDC Trigger Input and Output DC Power InputGround terminal Input Selection & Volume Remote ControlBasic Functions Navigation KeysFkey Controls Operational menu Menu SystemInput selection Tape loop Main menu system System setupRotary Max volume Startup volume Mute setup Volume RotaryEnglish Max volume Startup volume Mute setup Input English Triggers Phono gainTeach IR Brightness Timeout Display setupMain balance Remote Fkeys LanguageEnglish Version info Sensors StatusEverything appears to be on, but there is no sound TroubleshootingThere is no sound and the Standby LED is not lit Only one speaker seems to be playing IR remote control seems not to functionThere is a hum coming out of the speakers There is a mechanical hum coming from the unit Cleaning the cabinet Care and MaintenanceSpecifications NE Jamais Exposer CET Appareil À LA Pluie OU L’HUMIDITÉ Instructions importantes concernant la sécurité Sommaire Luminosité Extinction timeout Langue languageBienvenue dans la famille Classé Déballage et installation Tension d’alimentation Période de rodage Veuillez lire ce manuel… Interface graphique Caractéristiques particulièresLongévité extraordinaire Tests d’écoute intensifsTouche de mise en veille Standby et indicateur LED Face avantInitialisation Afficheur éteintÉcran tactile LCD Touche MenuTouche Mute Fenêtre infrarouge IRBouton de volume Entrée Tape enregistreur Face arrièreEntrées asymétriques prises RCA Entrées symétriques prises XLRSorties principales asymétriques RCA Sortie Tape enregistreurSorties principales symétriques XLR Prise de commande RS-232 Entrée et sortie infrarouge IR Prises de commande Classé can BusEntrée et sortie de commutation type DC Trigger Entrée alimentation courant continu DC PowerPrise de masse Ground Fonctions de base La télécommandeSélection des entrées Touches de navigationTouches de contrôles du système Fkey Sélection d’entrée Boucle d’enregistrement Le Système des MenusRéglage du système setup Chacun de ces paramètres est expliqué ci-dessous en détail Volume Bouton rotatifFrançais Volume maximum Volume au démarrage Entrée Français Apprentissage infrarouge IR Gain Phono Commutation TriggersLuminosité Extinction timeout Balance principale main balance Langue languageFrançais Info version Capteurs Tout semble correct, mais aucun son ne sort Problèmes de fonctionnementSeule une enceinte acoustique semble fonctionner La télécommande IR semble ne pas fonctionnerIl y a un bruit parasite dans les enceintes acoustiques Il y a un bruit mécanique en provenance de l’appareil Entretien du coffret EntretienSpécifications Dimensions Page V1.5 051706
Related manuals
Manual 44 pages 52.48 Kb

cp-700 specifications

The Classe Audio CP-700 is a high-performance audio preamplifier that exemplifies the brand’s commitment to sound quality, design, and innovative technology. Tailored for audiophiles and music enthusiasts, the CP-700 combines superior build quality with advanced circuitry to deliver an immersive listening experience.

One of the standout features of the CP-700 is its robust digital processing capabilities. It includes a high-resolution DAC (Digital-to-Analog Converter) that supports audio formats up to 24-bit/192kHz. This ensures that every detail of the music is reproduced with outstanding clarity and precision. The preamplifier also boasts multiple digital inputs, including USB, coaxial, and optical, making it versatile enough to accommodate various audio sources.

The analog section of the CP-700 is equally impressive, featuring Classe's proprietary technologies that minimize noise and distortion. The preamplifier utilizes high-quality components and a carefully engineered circuit design that embraces a dual-mono architecture. This approach reduces crosstalk and enhances imaging, allowing listeners to experience a wider soundstage and more defined instrument placement.

Moreover, the CP-700 features a state-of-the-art volume control system. Rather than a traditional potentiometer, Classe employs a digitally controlled analog attenuator, providing precise volume adjustments without compromising the audio quality. Users can expect smooth and seamless changes in volume levels, enhancing user experience during playback.

In terms of usability, the Classe CP-700 offers an intuitive interface, with a large, bright display and a user-friendly remote control. The preamp can also be controlled via an app, adding convenience for modern users who prefer controlling their audio systems through mobile devices.

Another notable characteristic is its elegant design. The CP-700 features a sleek aluminum chassis with a minimalist aesthetic that fits well in various home theater or music room setups. This careful attention to design aligns with Classe Audio’s philosophy of marrying form with function.

In conclusion, the Classe Audio CP-700 preamplifier stands out for its high-resolution audio capabilities, advanced volume control, and exceptional build quality. It is an ideal choice for discerning listeners who seek an unparalleled audio experience without compromising on features or aesthetics. With its combination of digital and analog prowess, the CP-700 represents the pinnacle of modern audio engineering.