Tascam CD-01 U, CD-01UPro owner manual Features and their functions, Front panel

Page 10

4 - Features and their functions

Front panel

1POWER switch

2Disc slot

Insert CD into the slot, label side upwards.

3Remote signal sensor

4EJECT key

Ejects a disc. This key cannot be used when Eject Block is on and disc is being played back.

5Display

The display is used to show the current status of the unit, as well as the current menu settings.

6PITCH (MENU) control knob

Push this control to turn the pitch control function on or off. When it is on, pitch value is shown on the Display, and pitch can be controlled +/- 12.5%.

Even when the power is turned off, the pitch control ON/OFF setting is retained.

When in shift mode, functions as the menu dial when rotated, and as the ENTER key when pushed.

When playback is paused and SHIFT indicator is lit, frame accurate search can be performed using with this knob.

7SKIP (INDEX/DIR SEARCH) keys

Use these to perform track searches.

When SHIFT indicator is lit, searches the index (Audio CD discs) or directory (MP3 discs).

8SEARCH (A.CUE, A.RDY) keys

Performs review or cue playback (search).

When in shift mode, selects the Auto Cue level or turns the Auto Ready mode on and off.

9PHONES level control

Adjusts the headphone output level.

0DISPLY key

Pressing this key changes the time mode on the dis- play. Even when the power is turned off, the time mode is retained.

When in menu mode, exits the menu mode.

qSHIFT key and indicator

Turns the shift mode on and off. When in shift mode, the indicator lights and other keys have shift func- tions which indicated under the keys.

Pressing this key again exits shift mode.

w ¥?π (JOG) key and indicator

Changes the playback mode between playback and pause.

The indicator stays on solid in playback mode and flashes in pause mode.

When playback is paused and SHIFT indicator is lit, frame accurate search can be performed using with the PITCH knob.

eCALL (PLAY MODE) key

Locates the playback to the last play start point.

When SHIFT indicator is lit, selects the playback mode.

r ª (INTRO CHECK) key

Use this key to stop playback.

When Incremental Play is activated, pressing this key pauses at the beginning of next track.

When in shift mode, enters Intro Check mode.

tPHONES jack

Use a standard pair of stereo headphones, equipped with a 1/4-inch plug, with this jack.

10 TASCAM CD-01U/CD-01UPro

Image 10
Contents CD-01 U /CD-01UPro ImportantO Safety Precautions Appliance to Rain or MoistureImportantO Safety Instructions SafetyO Information Optical pickupTable of contents Introduction Œ Environmental considerations Environmental considerationsRack-mounting the unit Handling of compact discsBatteries Remote control unitSome notes and precautions Inserting batteriesPower source Connecting analog audio equipmentConnecting digital audio equipment ConnectionsFeatures and their functions Front panelDisplay Remote Control Unit Rear panelFeatures and their functions Menu operation Operation basicsAbout finalization PlaybackDiscs for playback For MP3 CDsBasic playback operation Using headphonesPlayback modes Track selectionSearch Selecting by track numberFrame search Auto Ready Advanced operationsAuto Cue ResumeRepeat playback Incremental playTo B repeat playback Intro Check Editing a programmed track Program playbackAdding a track to the program Relay Play Fade-in and fade-outDeleting a programmed track Eject block Time display switchingEnd of track warning EOM Fader start/Event startRestoring factory default settings Event startSpecifications SpecificationsDimensional drawing Error messagesCD-01U/CD-01UPro CD-01 U /CD-01UPro