Tascam CD-01UPro, CD-01 U owner manual Features and their functions

Page 13

4 - Features and their functions

5PITCH key +/- keys

Use these keys to perform the pitch control function.

6KEY ORIG key

This turns the Key Original function on and off.

7A.CUE/DEL key

Sets the Auto Cue level.

During program input, the selected program number track is deleted.

8A.RDY/INS key

Turns the Auto Ready function on and off.

During program input, inserts a track into the program list.

9REPEAT key

Turns the Repeat Play mode on and off.

Pressing and holding this key for one second or more enters the Repeat A-B mode.

0INTRO CHECK key

Enters the Intro Check mode.

qMENU key

Enters the Menu mode.

wENTER key

Confirms the menu options and confirms the settings and editing on the menu.

ePREV key

Selects the previous menu option or setting on the menu.

rNEXT key

Selects the next menu option or setting on the menu.

tNumber keys

These are used to select track numbers.

yCLEAR key

During track number input, the track number is cleared when this key is pressed.

uPGM key

Pressing this key enters the Program mode.

iSKIP keys

oSEARCH keys

During playback or playback standby, press the key continuously for review or cue playback (search).

pINDEX/DIR SEARCH key

Use this key to select the index (Audio CDs) or directory (MP3 discs).

aJOG +/- keys

Pressing the key in pause mode performs the frame accurate search.

PLAY key

Press this key to start CD playback.

When incremental play function is activated, pressing this key play start from the next track.

READY key

When this key is pressed during playback or while stopped, enters standby mode.

fCALL key

Locates the playback to the last play start point.

STOP key

Use this key to stop playback.

When incremental play function is activated, pressing this key pauses at the beginning of the next track.

Use these keys to skip to the previous track or the next track.

TASCAM CD-01U/CD-01UPro 13

Image 13
Contents CD-01 U /CD-01UPro Appliance to Rain or Moisture ImportantO Safety PrecautionsImportantO Safety Instructions Optical pickup SafetyO InformationTable of contents Environmental considerations Introduction Œ Environmental considerationsHandling of compact discs Rack-mounting the unitSome notes and precautions Remote control unitBatteries Inserting batteriesConnecting digital audio equipment Connecting analog audio equipmentPower source ConnectionsFront panel Features and their functionsDisplay Rear panel Remote Control UnitFeatures and their functions Operation basics Menu operationDiscs for playback PlaybackAbout finalization For MP3 CDsPlayback modes Using headphonesBasic playback operation Track selectionSearch Selecting by track numberFrame search Auto Cue Advanced operationsAuto Ready ResumeRepeat playback Incremental playTo B repeat playback Intro Check Editing a programmed track Program playbackAdding a track to the program Relay Play Fade-in and fade-outDeleting a programmed track End of track warning EOM Time display switchingEject block Fader start/Event startEvent start Restoring factory default settingsSpecifications SpecificationsError messages Dimensional drawingCD-01U/CD-01UPro CD-01 U /CD-01UPro