Tascam CD-01 U Playback modes, Basic playback operation, Track selection, Using headphones

6 - Playback

Playback modes

There are four different playback modes. The mode

selected is indicated on the display.

Normal (continuous) playback mode: no indication lamp

Single playback mode: S is lit

Program playback mode: PGM is lit

Random playback mode: RANDOM is lit

The playback mode can be selected using the PLAY

MODE key on the remote control. Pressing the key

changes the playback mode in the following order: Cont ∑ Single ∑ Program ∑ Random

You can also select the playback mode pressing the CALL/PLAY MODE key on the front panel when in SHIFT mode.

While the mode can be changed from any playback mode, the explanation in this manual will assume the user is starting from the normal Continuous mode.

Basic playback operation

1Push the POWER switch to turn on the unit. The display will indicate NO DISC.

2Insert a disc into the slot, label side upwards.

After a disc is inserted, the total playing time and number of tracks will be displayed.

Do not force the disc into the slot, the CD-01U/CD- 01U Pro will pull the disc when partially inserted.

3Press the ¥?π key on the front panel or ¥ key on the remote control unit.

The play indication will light up, and playback begins from track 1. The number of the current track in play is indicated on the display.

To stop playback, press the ª key on the front panel or remote control unit.

To pause playback, press the ¥?π key on the front panel again or π key on the remote control unit.

The indication will blink, and the unit will enter play-

back standby mode.

To resume playback, press the ¥?π key or the front panel or ¥key on the remote control.

To remove the disc

Press the EJECT key on either the front panel or remote control unit.

You can insert back a disc into the slot by pressing the EJECT key or pull the disc and slot it in again.

When Eject Block is activated, EJECT key cannot be used when disc is being played back.

To play a desired track

Press the SKIP key to select the desired track or numerical keys.

Using headphones

Plug the headphone cord into the PHONES jack.

Adjust the volume with the volume control.

When using headphones, take care not to turn the vol-

ume too high. Listening at high volumes for extended periods of time may result in permanent hearing dam- age.

Track selection

Select desired tracks for playback with the skip keys on

the front panel or on the remote control.

To restart playback from the beginning of the track in

play, press the µ once.

To skip to the previous track, press µ twice.

To skip to the next track, press ≤ once.

When Auto Cue is off and the CD-01U/CD-01U Pro is

in stop or play mode, playback begins after selecting

the track.

When Auto Cue is off and the CD-01U/CD-01U Pro is in pause mode, the beginning of selected track is locat- ed ,and the unit enters playback standby mode.

When Auto Cue is on and the CD-01U/CD-01U Pro is in play mode, playback begins after selecting the track.

When Auto Cue is on and the CD-01U/CD-01U Pro is in pause or stop mode, when a track is selected, the point where sound begins (not where the track begins) on that track is located, and the unit enters playback standby mode.

16 TASCAM CD-01U/CD-01UPro