Tascam CD-01 U, CD-01UPro Fade-in and fade-out, Relay Play, Deleting a programmed track

Page 22

7 - Advanced operations

Deleting a programmed track

1 Enter the program mode.

2 Use the SEARCH keys to select the track for deletion. Also using the PITCH knob on the front panel to select the track for deletion. The track number will be shown in the display.

3 Pressing the DISPLAY key and SEARCH key simultaneously on the front panel or pressing the A.CUE/DEL key deletes the selected track.

4 Pressing the PITCH knob on the front panel or PGM key on the remote control exits the program mode.

Fade-in and fade-out

When this function is on and CD playback begins, the

song fades in. When playback is finished, the song

fades out.

The length of the fade in/out to/from the normal level

can be set between 0.5 and 10 seconds in 0.5 second

increments (Default setting: OFF).

1 To set the fade operation, enter the fade menu (menu number 05 FADE).

2 Press the PITCH knob on the front panel or ENTER key on the remote control to enter the fade in time setting.

3 Set the Fade in time using with the PITCH knob on the front panel or PREV/NEXT keys on the remote control.

4 Press the PITCH knob on the front panel or ENTER key on the remote control to set the fade in time and enter the fade out time setting.

5 Set the Fade out time using with the PITCH knob on the front panel or PREV/NEXT keys on the remote control.

6 Press the PITCH knob on the front panel or ENTER key on the remote control to set the fade out time and exit the menu.

Relay Play

When the disc in the first unit in a chain plays to the

end, the disc in the next unit in the chain will start.

Make all connections with power off.

1.Check to see that all the CD-01Us are turned off.

2.Refer to the diagrams, and connect the first CD- 01U's RELAY OUT to the second CD-01U's RELAY IN, the second CD-01U's RELAY OUT to the third CD-01U's RELAY IN, and so on. Finally, connect the last CD-01U's RELAY OUT to the first CD-01U's

RELAY IN.

3.Switch on power to all the CD-01Us.

4.To activate the relay play function, set the relay play menu (menu number 06 RELAY) to on for all the units in the chain.

RELAY IN RELAY OUT

RELAY IN

RELAY OUT

RELAY OUT

RELAY IN

RELAY INRELAY OUTRELAY IN

22 TASCAM CD-01U/CD-01UPro

Image 22
Contents CD-01 U /CD-01UPro ImportantO Safety Precautions Appliance to Rain or MoistureImportantO Safety Instructions SafetyO Information Optical pickupTable of contents Introduction Œ Environmental considerations Environmental considerationsRack-mounting the unit Handling of compact discsBatteries Remote control unitSome notes and precautions Inserting batteriesPower source Connecting analog audio equipmentConnecting digital audio equipment ConnectionsFeatures and their functions Front panelDisplay Remote Control Unit Rear panelFeatures and their functions Menu operation Operation basicsAbout finalization PlaybackDiscs for playback For MP3 CDsBasic playback operation Using headphonesPlayback modes Track selectionSearch Selecting by track numberFrame search Auto Ready Advanced operationsAuto Cue ResumeRepeat playback Incremental playTo B repeat playback Intro Check Editing a programmed track Program playbackAdding a track to the program Relay Play Fade-in and fade-outDeleting a programmed track Eject block Time display switchingEnd of track warning EOM Fader start/Event startRestoring factory default settings Event startSpecifications SpecificationsDimensional drawing Error messagesCD-01U/CD-01UPro CD-01 U /CD-01UPro