Tascam CD-01 U, CD-01UPro owner manual Advanced operations, Auto Cue, Auto Ready, Resume, Call

Page 18

7 - Advanced operations

Auto Cue

When the Auto Cue function is turned on and a track is selected, the point where sound begins (not where the track begins) on that track is located to and the unit enters pause mode.

When the ¥ key is pressed, playback begins at exactly that point.

Auto Cue is not supported for MP3 playback.

During stop mode, to cue to the start of sound on track one, just press the π key.

Turning the Auto Cue function on and off

Press the µ key on the front panel when SHIFT indi- cator is lit or A.CUE/DEL key on the remote control to select the auto cue level.

Auto cue level: OFF (default), -24, -30, -36, -42, -48, -54, -60, -66, -72 (dB)

When the Auto Cue function is activated, A.CUE indica- tor is lit on the display.

Even when the power is turned off, the Auto Cue setting is maintained.

Auto Ready

When the Auto Ready function is on, after each track is played, playback standby mode is entered at the begin- ning of the next track.

The behavior of Auto Ready function is follows.

Continuous play mode:

Pause the beginning of the next track when playback of the current track is finished.

Single play mode:

Pause the beginning of the current track when play- back of the current track is finished.

Program play mode:

Pause the beginning of the next programmed track when playback of the current track is finished.

When the Auto Cue function is also on, playback stand- by mode is entered at the beginning of the sound on the selected track, and not the beginning of that track.

Turning the Auto Ready function on and off

Press the key on the front panel when SHIFT indi- cator is lit or A.RDY/INS key on the remote control to turn the function on and off.

When the Auto Ready function is on, A.RDY indicator is lit on the display.

Even when the power is turned off, the Auto Ready set- ting is maintained.

Resume

When the resume function is on, the playback stop position is memorized and playback starts from that position when playback is resumed.

In the case of MP3 discs, the playback starts from the beginning of the last playing track when playback is resumed.

Turning the Resume function on and off

Set the resume function on and off on the menu (menu

number 09 RESUME).

When the Resume function is on, RESUME indicator is lit on the display.

Even when the power is turned off, this setting is main- tained.

Call

Pressing the CALL key on either the front panel or remote control locates the unit to last play start point, and the unit enters playback standby mode.

This function is not supported for MP3 playback.

18 TASCAM CD-01U/CD-01UPro

Image 18
Contents CD-01 U /CD-01UPro ImportantO Safety Precautions Appliance to Rain or MoistureImportantO Safety Instructions SafetyO Information Optical pickupTable of contents Introduction Œ Environmental considerations Environmental considerationsRack-mounting the unit Handling of compact discsBatteries Remote control unitSome notes and precautions Inserting batteriesPower source Connecting analog audio equipmentConnecting digital audio equipment ConnectionsFeatures and their functions Front panelDisplay Remote Control Unit Rear panelFeatures and their functions Menu operation Operation basicsAbout finalization PlaybackDiscs for playback For MP3 CDsBasic playback operation Using headphonesPlayback modes Track selectionSelecting by track number SearchFrame search Auto Ready Advanced operationsAuto Cue ResumeIncremental play Repeat playbackTo B repeat playback Intro Check Program playback Editing a programmed trackAdding a track to the program Fade-in and fade-out Relay PlayDeleting a programmed track Eject block Time display switchingEnd of track warning EOM Fader start/Event startRestoring factory default settings Event startSpecifications SpecificationsDimensional drawing Error messagesCD-01U/CD-01UPro CD-01 U /CD-01UPro