Intel Core 2 Duo, Q35 Express user manual Board Setup and Configuration before Boot

Page 30

Intel Core 2 Duo Processor and Intel Q35 Express Chipset—Setting Up and Configuring the Development Kit

Figure 22. Tightening Heatsink on the SRM and Board

3.4Board Setup and Configuration before Boot

Follow the steps below to operate the board.

Warning: Before starting, ensure the power supply is not connected to the board.

Ensure a safe and static-free work environment before removing any components from their anti-static packaging. The Development Platform is susceptible to electrostatic discharge, which may cause failure or unpredictable operation.

The Development Platform must be operated on a flame retardant surface because a chassis is not included with the platform.

Caution: Connecting the wrong cable or reversing a cable may damage the board and may damage the device being connected. Since the board is not in a protective chassis, use caution when connecting cables to the board.

Caution: The power supply cord is the main disconnect device to main power (AC power). The socket outlet should be installed near the equipment and should be readily accessible. To avoid shock, ensure that the power cord is connected to a properly wired and grounded receptacle. Do not connect/disconnect any cables or perform installation/ maintenance of the boards in this product during an electrical storm. Ensure that any equipment to which this product will be attached is also connected to properly wired and grounded receptacles.

Note: Ensure that setting up the ATX power supply is the final step performed in the process of assembly.

1.Physically inspect the motherboard for obvious defects. Note that each reference board has been tested prior to distribution, but a visual check should be performed to ensure no damage has occurred during shipping.

Intel® CoreTM 2 Duo Processor and Intel ® Q35 Express Chipset Development Kit

 

User’s Manual

October 2007

30

Order Number: 318476001US

Image 30
Contents User’s Manual OctoberOrder Number 318476-001US Contents Tables Jumpers Description USB Front Panel 1394a HeaderDate Revision Description 001 Initial releaseContent Overview Text ConventionsGlossary of Terms and Acronyms Definition Sheet 1Term Description Electronic Support Systems Support OptionsProduct Literature Additional Technical SupportIntel Literature Centers Development Kit Hardware Features Intel Q35 Express Chipset Development Kit OverviewSystem Block Diagram Board FeaturesDevelopment Kit Inventory Checklists Development Kit Hardware ItemsInternal I/O headers Development Kit Board SpecificationTechnology Features/support Reference Documentation Supported Intel Technologies Sheet 1System Memory Additional FeaturesProcessor Support Supported Intel Technologies Sheet 2Dual Channel Interleaved Mode Configurations Illustrates the memory channel and Dimm configurationDual Channel Interleaved Mode Configuration with 2x DIMMs Single Channel Asymmetric Mode Configurations Dual Channel Interleaved Mode Configuration with 4x DIMMsBack-Panel Connectors Audio-ConnectorsThis audio jack is use for microphone input USB port supports the USB 1.1/2.0 specification 2 RJ-45 LAN Connector with Integrated LEDsCoaxial S/PDIF In/Out Connector USB PortExtended Debug Probe XDP Debug FeaturesPower LEDs Port 80 Post Code LEDsVoltage Reference detail Development Kit Major Connectors and JumpersVoltage Reference Voltage Rail Expected Voltage3 1394a Header Jumper FunctionsUSB 2.0 Front Panel USB Front PanelSPI Removal / Installation Technique HeaderSPI Device Installation SPI Device RemovalClose the cover Place the fresh IC intoInstalling Board Standoffs OverviewMounting Hole Locations BTX Heatsink Setup with SRM SRM Alignment on any BTX BoardBTX board alignment on SRM Board Setup and Configuration before Boot Tightening Heatsink on the SRM and BoardCPU Fan location Post Codes Definitions Normal Post CodesCopy main Bios into system memory Restore Cpuid value to register. Bootblock runtime moduleMain Bios runtime code is to be decompressed Disable Atapi hardware. Jump back to checkpoint E9Set up boot strap processor for Post Early CPU Init Start. Disable cache and init local ApicSet up boot strap processor information Enumerate and set up application processorsLog errors encountered during Post Initialize IPL devices controlled by Bios and option ROMsGenerate and write contents of Escd in Nvram Display errors and prompt for user responseOrder Number 318476001US

Q35 Express, Core 2 Duo specifications

The Intel Core 2 Duo is a line of dual-core processors that was introduced by Intel in 2006. It represented a significant advancement in semiconductor design, offering improved performance and efficiency over its predecessors. The Core 2 Duo processors were built on Intel's 65nm manufacturing process and later transitioned to a 45nm process, allowing for higher clock speeds and lower power consumption.

One of the main features of the Core 2 Duo is its dual-core architecture. This allows the processor to handle multiple tasks simultaneously, enhancing multitasking capabilities. It is equipped with features such as Intel's Smart Cache, which optimizes the efficiency of memory usage by allowing both cores to access the cache. The processors also support Intel's Enhanced SpeedStep technology, which dynamically adjusts voltage and frequency according to workload, contributing to energy savings.

In terms of performance, the Core 2 Duo is capable of delivering high processing power for a wide range of applications, from everyday computing tasks to more demanding workloads like multimedia editing. The architecture supports 64-bit processing, enabling the use of more than 4GB of RAM, a significant improvement for performance-intensive applications.

The Q35 Express chipset complemented the Core 2 Duo processors, offering enhanced graphics capabilities through Intel's GMA X3100 integrated graphics. This chipset supports various technologies, including Intel vPro, which provides manageability features for enterprise users and enhances security. The Q35 Express also facilitates support for Intel’s Active Management Technology, allowing IT departments to remotely manage computers, even when powered off.

Furthermore, the Q35 Express chipset supports numerous connectivity and expansion options. It includes support for Intel High Definition Audio, providing a high-quality audio experience, and offers multiple PCI Express lanes for graphics and other expansion cards. The chipset supports up to 8 USB ports and SATA interface for connecting storage devices, making it well-suited for both consumer and business applications.

Overall, the Intel Core 2 Duo processors, along with the Q35 Express chipset, provide a robust and reliable platform suitable for a variety of uses. Their combination of dual-core performance, energy efficiency, and enhanced graphics support ensures that they continue to be relevant for many users well beyond their initial launch.