Chapter 1 Introduction
Features Summary
Form Factor | y 30.5cm x 33cm Extend ATX size form factor, 8 layers PCB. | |
CPU | y | mPGA 604 socket for Intel® XeonTM processor with 512KB L2cache |
| y Intel Prestonia 400/533MHz FSB | |
|
| |
Chipset | y Chipset RGE7501MC HOST/Memory Controller Hub | |
| y FW82801CA I/O Controller Hub | |
|
| |
Memory | y 6 | |
| y Supports 200MHz/266MHz DDR memory interface | |
| y Supports Up to 6 72bit Registered ECC DDR DIMMs | |
| y Supports up to 12GB DRAM (Max) | |
| y Supports only 2.5V DDR DIMM | |
| y Dual channel supports : | |
|
| y One 144bit wide DDR memory port with ECC type DRAM |
|
| integrity. |
|
| y Peak memory bandwidth of 3.2GB/s or 4.21 GB/s |
|
| yDIMMs must be populated in pairs. |
|
|
|
I/O Control | y | NS PC87366 |
Slots | y Support Intel P64H2 | |
|
| (4 |
| y 2 PCI slot supports 33MHz & PCI 2.2 compliant | |
| y | |
|
| supports the Intel ZCR and Adaptec Night hawk2 ZCR Adapters |
|
| |
y 2 IDE bus master (DMA33/ATA66/ATA100) IDE ports for up to 4 | ||
|
| ATAPI devices |
| y Supports up to ATA100 IDE & ATAPI | |
|
| |
y 1 Floppy port supports 360K, 720K,1.2M, 1.44M | ||
|
| and 2.88M bytes. |
y 1 Parallel port supports Normal/EPP/ECP mode y 2 COM ports (One at front, one at rear)
y 2 LAN ports (LAN1 & LAN2)
y 4 USB ports (Rear USB x 2, Front USB x 2)
6