Intel GA-8I915MK-GV user manual Password Check, CPU Hyper-Threading, Limit Cpuid Max. to

Password Check

Setup	The system will boot but will not access to Setup page if the correct
	password is not entered at the prompt. (Default value)
System	The system will not boot and will not access to Setup page if the correct
	password is not entered at the prompt.

If you want to cancel the setting of password, please just press ENTER to make [SETUP] empty.

CPU Hyper-Threading

Enabled	Enables CPU Hyper Threading Feature. Please note that this feature is only working
	for operating system with multi processors mode supported. (Default value)
Disabled	Disables CPU Hyper Threading.

Limit CPUID Max. to 3

Enabled	Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled	Disables CPUID Limit for windows XP. (Default value)

No-Execute Memory Protect (Note)

Enabled	Enables No-Execute Memory Protect function. (Default value)
Disabled	Disables No-Execute Memory Protect function.

CPU Enhanced Halt (C1E) (Note)

Enabled	Enables CPU Enhanced Halt (C1E) function. (Default value)
Disabled	Disables CPU Enhanced Halt (C1E) function.

CPU Thermal Monitor 2 (TM2) (Note)

Enabled	Enable CPU Thermal Monitor 2 (TM2) function. (Default value)
Disabled	Disable CPU Thermal Monitor 2 (TM2) function.

On-Chip Frame Buffer Size

1MB	Set On-chip frame buffer size to 1MB.
4MB	Set On-chip frame buffer size to 4MB. (Default value)
8MB	Set On-chip frame buffer size to 8MB.
16MB	Set On-chip frame buffer size to 16MB.
32MB	Set On-chip frame buffer size to 32MB.

English

(Note) This item will show up when you install a processor which supports this function.

- 35 - BIOS Setup