Intel LH500 user manual Console Redirection Sub Menu, Pc-Ansi, VT-UTF8, Xon/Xoff Cts/Rts

3.5.5 Console Redirection Sub Menu

The Console Redirection Sub Menu looks like the following:

		PhoenixBIOS Setup Utility
	Advanced
			Console Redirection		Item Specific Help
					If enabled, it will use
Com Port Address		[Disabled]			a port on the
Baud Rate		[19.2K]			motherboard.
Console Type		[PC ANSI]
Flow Control		[CTS/RTS]
Console connection		[Direct]
Continue C.R. after POST		[Off]
F1 Help	↑↓ Select Item		-/+ Change Values	F9 Setup Defaults
ESC Exit	←→Select Menu		Enter Select►Sub-Menu	F10 Save and Exit

The following table shows the items that you can customize on the Console Redirection sub-menu page:

Item	Options	Description
Com Port Address	Disabled	If enabled, it will use a port on
	On-board COM A	the motherboard.
	On-board COM B
Baud Rate	300	Enables the specified baud rate.
	1200
	2400
	9600
	19.2K
	38.4K
	57.6K
Console Type	VT100	Enables the specified console
	VT100, 8bit	type.
	PC-ANSI, 7bit
	PC-ANSI
	VT100+
	VT-UTF8
Flow Control	None	Enables flow control
	XON/XOFF
	CTS/RTS
Console connection	Direct	Indicate whether the console is
	Via modem	connected directly to the system
		or a modem is used to connect.
Continue C.R. after POST	Off	Enables Console Redirection
	On	after OS has loaded.

58