Lenovo 6436, 6438, 6437, 6435 manual Drives

Page 18

Table 1. Features and specifications

Microprocessor:

One Intel® LGA 775 single core, dual core, or quad core, depending on the server model:

vSingle core: Celeron 440 or later

vDual core: Core 2 Duo E4600 or Xeon E3110, or later

vQuad core: Xeon 3300 series

Notes:

1.Use the Configuration/Setup Utility program to determine the size of the L2 cache, type and speed of the microprocessor, and speed of the front-side bus.

2.Intel Virtualization Technology (VT) is not available on the Celeron 440 or the Core 2 Duo E4600; however, these microprocessors can run paravirtualization.

Memory:

vMinimum: Two 512 MB DIMMs

vMaximum: 8 GB

vType: PC2-5300, 667 MHz, ECC, DDR II unbuffered SDRAM DIMMs

vSlots: Four dual inline

vSupports 512 MB, 1 GB, and 2 GB DIMMs

Drives:

Ultrabay Enhanced: CD or CD/DVD

Expansion bays:

One of the following configurations:

vTwo 3.5-inch slim-high bays for hard disk drives.

Hot-swap models: Supports maximum of two serial-attached SCSI (SAS) drives or two serial ATA (SATA) drives.

Simple-swap models: Supports maximum of two SATA drives

vFour 2.5-inch small form-factor (SFF) hot-swap bays for hard disk drives. Supports a maximum of four 2.5-inch SAS drives.

Expansion slots:

Two PCI Express x8 slots, one low-profile and one 3/4-length full height. Low-profile slot supports x4 electrical.

Video controller:

vATI ES1000 video on system board

v16 MB DDR II video memory

Power supply:

351 watt (110 or 220 V ac auto-sensing)

Size:

vHeight: 43 mm (1.75 inches, 1 U)

vDepth: 559 mm (22 inches)

vWidth: 440 mm (17.32 inches)

vMaximum weight: 12.7 kg (28 lb) depending on your configuration

Integrated functions:

vTwo Broadcom NetXtremeGB Ethernet controllers on the system board

vSerial port

vFour USB ports (two on front and two on rear of server)

vSystems-management port if an optional Remote Supervisor Adapter II SlimLine is installed

Hard disk controllers:

vSerial ATA (SATA) controller (simple-swap SATA models)

vSerial-attached SCSI (SAS) controller with integrated RAID (hot-swap SAS/SATA models) that supports RAID levels 0, 1, 1E

Environment:

vAir temperature:

Server on: 10° to 35°C (50.0°

to 95.0°F); altitude: 0 to 914.4 m (3000 ft)

Server on: 10° to 32°C (50.0°

to 89.6°F); altitude: 914.4 m (3000 ft) to 2133.6 m (7000 ft)

Server off: 10° to 43°C (50.0° to 109.4°F); maximum altitude: 2133.6 m (7000 ft)

Shipping: -40° to 60°C (-40° to 140°F); maximum altitude: 2133.6 m (7000 ft)

vHumidity:

Server on: 8% to 80%

Server off: 8% to 80%

Acoustical noise emissions:

vSound power, idling: 6.5 bel maximum

vSound power, operating: 6.5 bel maximum

Heat output:

Approximate heat output in British thermal units (Btu) per hour:

vMinimum configuration: 341 Btu per hour (100 watts)

vMaximum configuration: 1024 Btu per hour (300 watts)

Electrical input:

vSine-wave input (50 - 60 Hz) required

vInput voltage low range:

Minimum: 100 V ac

Maximum: 127 V ac

vInput voltage high range:

Minimum: 200 V ac

Maximum: 240 V ac

vApproximate input kilovolt-amperes (kVA):

Minimum: 0.102 kVA

Maximum: 0.55 kVA

Notes:

1.Power consumption and heat output vary depending on the number and type of optional features that are installed and the power-management optional features that are in use.

2.These levels were measured in controlled acoustical environments according to the procedures that are specified by the American National Standards Institute (ANSI) S12.10 and ISO 7779 and are reported in accordance with ISO 9296. Actual sound-pressure levels in a given location might exceed the average stated values because of room reflections and other nearby noise sources. The declared sound-power levels indicate an upper limit, below which a large number of computers will operate.

3.There is no keyboard connector or mouse connector on the server. You can connect a USB keyboard and USB mouse to the server by using the USB connectors.

4ThinkServer RS110 Types 6435, 6436, 6437 and 6438: User Guide

Image 18
Contents User Guide Page User Guide Page Contents Page Safety Page To Connect To Disconnect Do not Safety Statement Safety Page ThinkServer RS110 Types 6435, 6436, 6437 Related documentationThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Features and specifications Drives What your server offers Reliability, availability, and serviceability features RAID supportSystems-management capabilities Server controls, LEDs, and power EasyStartupFront view Rear view Server power features Turning on the serverThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Server components Inch modelsDimm Installing optional devices System-board internal connectors System-board switches and jumpers Component SettingsSystem-board external connectors System-board LEDs LEDSystem-board optional-device connectors Installation guidelines System reliability guidelines Working inside the server with the power on Handling static-sensitive devicesRemoving the cover Installing an adapter Expansion-slot cover Remove the cover see Removing the cover on Expansion-slot bracket Installing a hard disk drive Installing a simple-swap Serial ATA hard disk driveSata hard disk drive back plate Installing a hot-swap hard disk drive Installing a new CD or DVD drive Installing an optional PCI-X riser-card assembly Installing optional devices Expansion-slot bracket Installing a memory module ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Connecting the cables Completing the installationInstalling the cover FrontUpdating the server configuration RearEthernet controller configuration Configuration/Setup Utility programLSI Logic Configuration Utility program Baseboard management controller utility programsConfiguration/Setup Utility menu choices Using the Configuration/Setup Utility programStarting the Configuration/Setup Utility program System SummaryDevices and I/O Ports Administrator PasswordPower-on Password Date and TimeBaseboard Management Controller BMC Settings Advanced SetupRSA II Settings Ipmi Specification VersionUser Account Settings BMC Serial Port Access ModeReboot System on NMI BMC Network ConfigurationRestore Settings PasswordsSave Settings Load Default SettingsAdministrator password Using the LSI Logic Configuration Utility program Starting the LSI Logic Configuration Utility programConfiguring the controller and devices Using the baseboard management controller Using the baseboard management controller utility programsConfiguring the Gigabit Ethernet controllers Appendix. Notices Trademarks Important notesWaste electrical and electronic equipment Weee notices Recycling statements for Japan Battery return program For the European UnionFederal Communications Commission FCC statement German Ordinance for Work gloss statementElectronic emissions notices For CaliforniaEuropean Union EMC Directive conformance statement Industry Canada Class a emission compliance statementAvis de conformité à la réglementation dIndustrie Canada German Class a compliance statementThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Appendix. Notices ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Index Integrated functions LSI Logic Configuration Utility program ThinkServer RS110 Types 6435, 6436, 6437 and 6438 User Guide Page Part Number 46U0854
Related manuals
Manual 90 pages 43.48 Kb Manual 88 pages 42.45 Kb