4. Remove the retention clip 1 from the drive and save it for future use.
To install a CD or DVD drive, complete the following steps:
1.Read the safety information that begins on page v and “Installation guidelines” on page 19.
2.Make sure that the server and peripheral devices are turned off and that the power cords and all external cables are disconnected. Remove the cover (see “Removing the cover” on page 21).
3.Follow the instructions that come with the drive to set any jumpers or switches.
4.Attach the drive retention clip 1 to the side of the drive.
5.Slide the drive into the CD/DVD drive bay until the drive clicks into place.
If you have other devices to install or remove, do so now. Otherwise, go to “Completing the installation” on page 35.
Installing an optional PCI-X riser-card assembly
The server comes with a PCI Express
The
To install a
1.Read the safety information that begins on page v and “Installation guidelines” on page 19.
2.Turn off the server and peripheral devices, and disconnect the power cord and all external cables.
3.Remove the cover (see “Removing the cover” on page 21).
4.Install the