a.Separate the P4 connector on the cable that connects the power supply to the CD/DVD interposer card.
b.Connect the short 4-wire length of the riser-card power cable (2 to 3) to the two halves of the P4 connector, as shown in the illustration.
c.Make sure that the long 2-wire section (2 to 1) reaches the riser-card assembly. Route the cable between fans 4 and 5 to reach the assembly.
5.Touch the static-protective package that contains the PCI-X riser-card assembly to any unpainted metal surface on the server. Then, remove the assembly from the static-protective package. Avoid touching the components and gold-edge connectors on the assembly.
Chapter 2. Installing optional devices 31