Lenovo 9213, 9212 manual Installing adapters, What to do next

Page 29

2.Locate the memory connectors. See “Identifying parts on the system board” on page 11.

3.Open the retaining clips.

4.Position the memory module over the memory connector. Make sure that the notch1on the memory module aligns correctly with the connector key2on the system board. Push the memory module straight down into the memory connector until the retaining clips close.

What to do next:

vTo work with another option, go to the appropriate section.

vTo complete the installation, go to “Replacing the cover and connecting the cables” on page 24.

Installing adapters

This section provides information and instructions for installing and removing adapters. Your computer has four expansion connectors. There are two connectors for PCI adapters, one for a PCI Express x16 adapter (some models), and one for a PCI Express x1 adapter.

To install an adapter:

1.Remove the computer cover. See “Removing the cover” on page 10.

Chapter 1. Installing options 13

Image 29

Contents User Guide Types 9212 Page User Guide Types 9212 Page Contents Iv User Guide Conditions that require immediate action Important safety informationService General safety guidelinesExtension cords and related devices Power cords and power adaptersBatteries Plugs and outletsHeat and product ventilation CD and DVD drive safetyTo connect To disconnect Additional safety informationLithium battery notice Laser compliance statement Modem safety informationPower supply statement Information resources OverviewXiv User Guide Features Installing optionsMemory Operating systems, preinstalled varies by model type Available options Tools required SpecificationsHandling static-sensitive devices Installing external optionsLocating the connectors on the front of your computer Locating the connectors on the rear of your computer Obtaining device drivers Connector DescriptionRemoving the cover Identifying parts on the system board Locating componentsInstalling memory modules What to do next Installing adaptersWhat to do next Drive specifications Installing internal drivesUser Guide Installing a drive in bay 1 or bay Installing a hard disk drive in bay Installing options Connecting the first optical drive Connecting drivesInstalling security features Connecting a serial ATA hard disk drivePadlock Password protectionChanging the battery Erasing a lost or forgotten password clearing Cmos Replacing the cover and connecting the cables Using the Setup Utility program Selecting a startup device Setting, changing, and deleting a passwordUsing Security Profile by Device Changing the startup sequence Exiting from the Setup Utility programSelecting a temporary startup device User Guide Updating flashing Bios from your operating system Updating flashing Bios from a diskette or CD-ROMAppendix A. Updating system programs System programsRecovering from a POST/BIOS update failure Cleaning a mouse with a ball Appendix B. Cleaning the mouseCleaning an optical mouse User Guide Basic AT commands Appendix C. Manual modem commandsSet Pulse dial as default Low speaker volumeSet Tone Dial as default Internal speaker on until carrier detectedExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 2 commands Fax Class 1 commandsVoice commands Appendix C. Manual modem commands User Guide Appendix D. Notices Trademarks Television output noticeIndex Sata connectors Page Part Number 39J7678