Lenovo 9213, 9212 manual Installing options

Page 35

2.Remove the front bezel by pushing the blue release button as shown.

3.Remove the metal shield from drive bay 3 by using a flat-blade screwdriver to gently pry it loose.

4.PATA drives must be jumpered as either a master or a slave device. SATA hard disk drives do not require either a master or a slave device jumper. If you are installing an SATA hard disk drive, continue to step 6.

5.If there is a combination of optical and parallel ATA hard disk drives in bays 1, 2, and 3, set the hard disk drive as a master device and the optical drive as a slave device.

Refer to the documentation that comes with your drive for master/slave jumper information.

6.Install a retainer bracket on the side of the drive.

Chapter 1. Installing options 19

Image 35

Contents User Guide Types 9212 Page User Guide Types 9212 Page Contents Iv User Guide Conditions that require immediate action Important safety informationService General safety guidelinesExtension cords and related devices Power cords and power adaptersBatteries Plugs and outletsHeat and product ventilation CD and DVD drive safetyTo connect To disconnect Additional safety informationLithium battery notice Laser compliance statement Modem safety informationPower supply statement Information resources OverviewXiv User Guide Features Installing optionsMemory Operating systems, preinstalled varies by model type Available options Tools required SpecificationsHandling static-sensitive devices Installing external optionsLocating the connectors on the front of your computer Locating the connectors on the rear of your computer Obtaining device drivers Connector DescriptionRemoving the cover Identifying parts on the system board Locating componentsInstalling memory modules What to do next Installing adaptersWhat to do next Drive specifications Installing internal drivesUser Guide Installing a drive in bay 1 or bay Installing a hard disk drive in bay Installing options Connecting the first optical drive Connecting drivesInstalling security features Connecting a serial ATA hard disk drivePadlock Password protectionChanging the battery Erasing a lost or forgotten password clearing Cmos Replacing the cover and connecting the cables Using the Setup Utility program Selecting a startup device Setting, changing, and deleting a passwordUsing Security Profile by Device Changing the startup sequence Exiting from the Setup Utility programSelecting a temporary startup device User Guide System programs Updating flashing Bios from a diskette or CD-ROMUpdating flashing Bios from your operating system Appendix A. Updating system programsRecovering from a POST/BIOS update failure Cleaning a mouse with a ball Appendix B. Cleaning the mouseCleaning an optical mouse User Guide Basic AT commands Appendix C. Manual modem commandsInternal speaker on until carrier detected Low speaker volumeSet Pulse dial as default Set Tone Dial as defaultExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 2 commands Fax Class 1 commandsVoice commands Appendix C. Manual modem commands User Guide Appendix D. Notices Trademarks Television output noticeIndex Sata connectors Page Part Number 39J7678