Lenovo 9212, 9213 manual Installing a hard disk drive in bay

Page 34

vIf you are installing an additional optical drive, set it as a slave device.

vIf there is a combination of optical and parallel ATA hard disk drives in bays 1 and 2, set the hard disk drive as a master device and the optical drive as a slave device.

Refer to the documentation that comes with your drive for master/slave jumper information.

6.For a 5.25-inch drive, install a retainer bracket on the side of the drive.

7.For a 3.5-inch drive, install the drive into the Universal Adapter Bracket, 5.25 to 3.5-inch.

8.Install the drive into the bay until it snaps into position.

Note: If you are installing the adapter bracket, install the screws that secure the bracket in the bay.

9.Continue at “Connecting drives” on page 20.

Installing a hard disk drive in bay 3

1.Remove the computer cover. See “Removing the cover” on page 10.

18User Guide

Image 34

Contents User Guide Types 9212 Page User Guide Types 9212 Page Contents Iv User Guide Important safety information Conditions that require immediate actionGeneral safety guidelines ServicePower cords and power adapters Extension cords and related devicesPlugs and outlets BatteriesCD and DVD drive safety Heat and product ventilationLithium battery notice Additional safety informationTo connect To disconnect Modem safety information Laser compliance statementPower supply statement Overview Information resourcesXiv User Guide Installing options FeaturesMemory Operating systems, preinstalled varies by model type Available options Specifications Tools requiredInstalling external options Handling static-sensitive devicesLocating the connectors on the front of your computer Locating the connectors on the rear of your computer Connector Description Obtaining device driversRemoving the cover Locating components Identifying parts on the system boardInstalling memory modules Installing adapters What to do nextWhat to do next Installing internal drives Drive specificationsUser Guide Installing a drive in bay 1 or bay Installing a hard disk drive in bay Installing options Connecting drives Connecting the first optical driveConnecting a serial ATA hard disk drive Installing security featuresChanging the battery Password protectionPadlock Erasing a lost or forgotten password clearing Cmos Replacing the cover and connecting the cables Using the Setup Utility program Using Security Profile by Device Setting, changing, and deleting a passwordSelecting a startup device Selecting a temporary startup device Exiting from the Setup Utility programChanging the startup sequence User Guide Appendix A. Updating system programs Updating flashing Bios from a diskette or CD-ROMUpdating flashing Bios from your operating system System programsRecovering from a POST/BIOS update failure Cleaning an optical mouse Appendix B. Cleaning the mouseCleaning a mouse with a ball User Guide Appendix C. Manual modem commands Basic AT commandsSet Tone Dial as default Low speaker volumeSet Pulse dial as default Internal speaker on until carrier detectedExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 1 commands Fax Class 2 commandsVoice commands Appendix C. Manual modem commands User Guide Appendix D. Notices Television output notice TrademarksIndex Sata connectors Page Part Number 39J7678