Lenovo 9213, 9212 manual Installing a drive in bay 1 or bay

Page 33

Installing a drive in bay 1 or bay 2

1.Remove the computer cover. See “Removing the cover” on page 10.

2.Remove the front bezel by pushing the blue release button as shown.

3.Remove the metal shield from the drive bay by using a flat-blade screwdriver to gently pry it loose.

4.If you are installing a drive with accessible media, such as an optical drive, remove the plastic panel in the bezel by squeezing the plastic tabs that secure the panel on the inside of the bezel.

Note: If you are installing a 3.5-inch hard disk drive you must use a Universal Adapter Bracket, 5.25 to 3.5-inch. You can obtain this bracket from a local computer retailer or by contacting the Customer Support Center.

5.PATA drives must be jumpered as either a master or a slave device. SATA hard disk drives do not require either a master or a slave device jumper. If you are installing an SATA hard disk drive, continue to step 6 on page 18.

v If you are installing the first optical drive, set it as a master device.

Chapter 1. Installing options 17

Image 33

Contents User Guide Types 9212 Page User Guide Types 9212 Page Contents Iv User Guide Conditions that require immediate action Important safety informationService General safety guidelinesExtension cords and related devices Power cords and power adaptersBatteries Plugs and outletsHeat and product ventilation CD and DVD drive safetyAdditional safety information Lithium battery noticeTo connect To disconnect Laser compliance statement Modem safety informationPower supply statement Information resources OverviewXiv User Guide Features Installing optionsMemory Operating systems, preinstalled varies by model type Available options Tools required SpecificationsHandling static-sensitive devices Installing external optionsLocating the connectors on the front of your computer Locating the connectors on the rear of your computer Obtaining device drivers Connector DescriptionRemoving the cover Identifying parts on the system board Locating componentsInstalling memory modules What to do next Installing adaptersWhat to do next Drive specifications Installing internal drivesUser Guide Installing a drive in bay 1 or bay Installing a hard disk drive in bay Installing options Connecting the first optical drive Connecting drivesInstalling security features Connecting a serial ATA hard disk drivePassword protection Changing the batteryPadlock Erasing a lost or forgotten password clearing Cmos Replacing the cover and connecting the cables Using the Setup Utility program Setting, changing, and deleting a password Using Security Profile by DeviceSelecting a startup device Exiting from the Setup Utility program Selecting a temporary startup deviceChanging the startup sequence User Guide Updating flashing Bios from your operating system Updating flashing Bios from a diskette or CD-ROMAppendix A. Updating system programs System programsRecovering from a POST/BIOS update failure Appendix B. Cleaning the mouse Cleaning an optical mouseCleaning a mouse with a ball User Guide Basic AT commands Appendix C. Manual modem commandsSet Pulse dial as default Low speaker volumeSet Tone Dial as default Internal speaker on until carrier detectedExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 2 commands Fax Class 1 commandsVoice commands Appendix C. Manual modem commands User Guide Appendix D. Notices Trademarks Television output noticeIndex Sata connectors Page Part Number 39J7678