Lenovo 9213, 9212 manual Connecting a serial ATA hard disk drive, Installing security features

Page 37

2.Connect the extra connector on the signal cable to the new drive.

3.Locate the extra four-wire power connector and connect it to the drive.

Connecting a serial ATA hard disk drive

A serial hard disk drive can be connected to any available SATA IDE connector.

1.Locate the signal cable that comes with the new drive.

2.Locate an available SATA IDE connector on the system board. See “Identifying parts on the system board” on page 11.

3.Connect one end of the signal cable to the drive and the other to an available SATA IDE connector on the system board.

4.Locate one of the extra five-wire power connectors and connect it to the drive.

What to do next

vTo work with another option, go to the appropriate section.

vTo complete the installation, go to “Replacing the cover and connecting the cables” on page 24.

Installing security features

To help prevent hardware theft and unauthorized access to your computer, security lock options are available. In addition to physical locks, unauthorized use of your computer can be prevented by a software lock that locks the keyboard until a correct password is typed in.

Chapter 1. Installing options 21

Image 37

Contents User Guide Types 9212 Page User Guide Types 9212 Page Contents Iv User Guide Conditions that require immediate action Important safety informationService General safety guidelinesExtension cords and related devices Power cords and power adaptersBatteries Plugs and outletsHeat and product ventilation CD and DVD drive safetyLithium battery notice Additional safety informationTo connect To disconnect Laser compliance statement Modem safety informationPower supply statement Information resources OverviewXiv User Guide Features Installing optionsMemory Operating systems, preinstalled varies by model type Available options Tools required SpecificationsHandling static-sensitive devices Installing external optionsLocating the connectors on the front of your computer Locating the connectors on the rear of your computer Obtaining device drivers Connector DescriptionRemoving the cover Identifying parts on the system board Locating componentsInstalling memory modules What to do next Installing adaptersWhat to do next Drive specifications Installing internal drivesUser Guide Installing a drive in bay 1 or bay Installing a hard disk drive in bay Installing options Connecting the first optical drive Connecting drivesInstalling security features Connecting a serial ATA hard disk driveChanging the battery Password protectionPadlock Erasing a lost or forgotten password clearing Cmos Replacing the cover and connecting the cables Using the Setup Utility program Using Security Profile by Device Setting, changing, and deleting a passwordSelecting a startup device Selecting a temporary startup device Exiting from the Setup Utility programChanging the startup sequence User Guide Updating flashing Bios from your operating system Updating flashing Bios from a diskette or CD-ROMAppendix A. Updating system programs System programsRecovering from a POST/BIOS update failure Cleaning an optical mouse Appendix B. Cleaning the mouseCleaning a mouse with a ball User Guide Basic AT commands Appendix C. Manual modem commandsSet Pulse dial as default Low speaker volumeSet Tone Dial as default Internal speaker on until carrier detectedExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 2 commands Fax Class 1 commandsVoice commands Appendix C. Manual modem commands User Guide Appendix D. Notices Trademarks Television output noticeIndex Sata connectors Page Part Number 39J7678