Lenovo B8000, B6000 manual Important information about replacing RoHS compliant FRUs, Original part

Page 22

Lenovo B6000/B8000 Hardware Maintenance Manual

Important information about replacing RoHS compliant FRUs

RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts. If the original FRU parts are non-compliant, replacement parts can also be non-compliant. In all cases if the original FRU parts are RoHS compliant, the replacement part must also be RoHS compliant.

Note: RoHS and non-RoHS FRU part numbers with the same fit and function are identified with unique FRU part numbers.

Lenovo plans to transit to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and schedule in the EU. Products sold in 2005 and 2006 will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant FRUs.

RoHS compliant FRUs have unique FRU part numbers. Before or after the RoHS implementation date, failed RoHS compliant parts must always be replaced with RoHS compliant ones, so only the FRUs identified as compliant in the system HMM or direct substitutions for those FRUs may be used.

Products marketed before June 2006 Products marketed after June 2006

Current or

Replacement

Current or

Replacement

original part

FRU

original part

FRU

 

 

 

 

Non-RoHS

Can be Non-RoHS

Non-RoHS

Can be RoHS

 

 

Non-RoHS

Can sub to RoHS

RoHS

Must be RoHS

Must be RoHS

Must be RoHS

Note: A direct substitution is a part with a different FRU part number that is automatically shipped by the distribution center at the time of the order.

18

Image 22
Contents B6000 / B8000 Page Contents About this manual Lenovo B6000 Lenovo B8000Safety information General safety Electrical safety Lenovo B6000/B8000 Hardware Maintenance Manual Safety inspection guide Grounding requirements Safety notices multilingual translations Safety noticeLenovo B6000/B8000 Hardware Maintenance Manual Safety information Lenovo B6000/B8000 Hardware Maintenance Manual Safety information Lenovo B6000/B8000 Hardware Maintenance Manual Safety information Laser compliance statement Safety information Before replacing parts Strategy for replacing FRUsImportant service information Important notice for replacing a system boardImportant information about replacing RoHS compliant FRUs Original partGeneral checkout Following are not covered under warranty What to do firstApproximate information about the battery status Power system checkoutChecking the internal battery status Accurate information about the battery statusLenovo B6000/B8000 Hardware Maintenance Manual Security Power managementActivating/Deactivating the Display Specifications Feature DescriptionLenovo B6000 / B8000 Plastic to plastic FRU replacement noticesScrew notices Logic card to plasticRemoving and replacing an FRU Rear cover Peeling off the label on the rear coverSeparating the rear cover using a suction tool Unlocking the central area of the rear cover Step Screw quantity Color Torque Right speaker box Screws on the holder of the speaker boxDisconnecting the speaker FPC Prying off the holder Removing the speaker box Disconnecting the main FPC Hinge frame and pivotRemoving the hinge frame with the main FPC at the left end Removing the hinge pivot Disconnecting the main camera FPC Main cameraDetaching the main camera Left speaker box Screws fixing the left speaker boxMain antenna Screws on the main antennaPhillips flat-head, M1.4 × 1.5 Black N/A WiFi antenna Screw on the WiFi antennaWiFi antenna frame detached Main Pcba Important notices for handling PCBRemoving the conductive fiber Removing the USB FPC holder Disconnecting the FPC between the main Pcba and sub board Disconnecting the LCD FPC Removing the adhisive tapes Main Pcba removed 10 Unlock the main antenna FPC connector 12 Main antenna removed Sub board Screws on the sub boardDisconnecting the TP FPC Detaching the vibrator motor Power button Pushing out the power buttonLocations Front viewRear view Parts list Overall Lenovo B6000 / B8000 Parts list-Overall for Lenovo B6000 only Parts list-Overall for Lenovo B8000 only Parts list-Screw ScrewPage Trademarks