Lenovo B8000, B6000 manual General safety

Page 6

Lenovo B6000/B8000 Hardware Maintenance Manual

General safety

Follow these rules below to ensure general safety:

Observe a good housekeeping in the area where the machines are put during and after the maintenance.

When lifting any heavy object:

1.Make sure that you can stand safely without slipping.

2.Distribute the weight of the object equally between your feet.

3.Use a slow lifting force. Never move suddenly or twist when you attempt to lift it.

4.Lift it by standing or pushing up with your leg muscles; this action could avoid the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you.

Do not perform any action that causes hazards to the customer, or that makes the machine unsafe.

Before you start the machine, make sure that other service representatives and the customer are not in a hazardous position.

Place removed covers and other parts in a safe place, keeping them away from all personnel, while you are servicing the machine.

Keep your toolcase away from walk areas so that other people will not trip it over.

Do not wear loose clothing that can be trapped in the moving parts of the machine. Make sure that your sleeves are fastened or rolled up above your elbows. If your hair is long, fasten it.

Insert the ends of your necktie or scarf inside clothing or fasten it with the nonconductive clip, about 8 centimeters (3 inches) from the end.

Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your clothing.

Attention: Metal objects are good electrical conductors.

Wear safety glasses when you are hammering, drilling, soldering, cutting wire, attaching springs, using solvents, or working in any other conditions that may be hazardous to your eyes.

After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective.

Reinstall all covers correctly before returning the machine to the customer.

Fan louvers on the machine help to prevent the overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers.

2

Image 6
Contents B6000 / B8000 Page Contents About this manual Lenovo B6000 Lenovo B8000Safety information General safety Electrical safety Lenovo B6000/B8000 Hardware Maintenance Manual Safety inspection guide Grounding requirements Safety notices multilingual translations Safety noticeLenovo B6000/B8000 Hardware Maintenance Manual Safety information Lenovo B6000/B8000 Hardware Maintenance Manual Safety information Lenovo B6000/B8000 Hardware Maintenance Manual Safety information Laser compliance statement Safety information Before replacing parts Strategy for replacing FRUsImportant service information Important notice for replacing a system boardImportant information about replacing RoHS compliant FRUs Original partGeneral checkout Following are not covered under warranty What to do firstApproximate information about the battery status Power system checkoutChecking the internal battery status Accurate information about the battery statusLenovo B6000/B8000 Hardware Maintenance Manual Power management SecurityActivating/Deactivating the Display Specifications Feature DescriptionLenovo B6000 / B8000 Plastic to plastic FRU replacement noticesScrew notices Logic card to plasticRemoving and replacing an FRU Rear cover Peeling off the label on the rear coverSeparating the rear cover using a suction tool Unlocking the central area of the rear cover Step Screw quantity Color Torque Right speaker box Screws on the holder of the speaker boxDisconnecting the speaker FPC Prying off the holder Removing the speaker box Disconnecting the main FPC Hinge frame and pivotRemoving the hinge frame with the main FPC at the left end Removing the hinge pivot Disconnecting the main camera FPC Main cameraDetaching the main camera Left speaker box Screws fixing the left speaker boxMain antenna Screws on the main antennaPhillips flat-head, M1.4 × 1.5 Black N/A WiFi antenna Screw on the WiFi antennaWiFi antenna frame detached Main Pcba Important notices for handling PCBRemoving the conductive fiber Removing the USB FPC holder Disconnecting the FPC between the main Pcba and sub board Disconnecting the LCD FPC Removing the adhisive tapes Main Pcba removed 10 Unlock the main antenna FPC connector 12 Main antenna removed Sub board Screws on the sub boardDisconnecting the TP FPC Detaching the vibrator motor Power button Pushing out the power buttonLocations Front viewRear view Parts list Overall Lenovo B6000 / B8000 Parts list-Overall for Lenovo B6000 only Parts list-Overall for Lenovo B8000 only Parts list-Screw ScrewPage Trademarks