Lenovo B6000, B8000 manual Separating the rear cover using a suction tool

Page 33

Lenovo B6000 / B8000

3.Separate the top right corner of the rear cover from the main body of the tablet using a suction tool as shown in the figure below, and then move the suction tool to the left along the upper edge to unlock the entire upper edge from the main body.

Figure 1-3 Separating the rear cover using a suction tool

29

Image 33

Contents B6000 / B8000 Page Contents Lenovo B6000 Lenovo B8000 About this manualSafety information General safety Electrical safety Lenovo B6000/B8000 Hardware Maintenance Manual Safety inspection guide Grounding requirements Safety notice Safety notices multilingual translationsLenovo B6000/B8000 Hardware Maintenance Manual Safety information Lenovo B6000/B8000 Hardware Maintenance Manual Safety information Lenovo B6000/B8000 Hardware Maintenance Manual Safety information Laser compliance statement Safety information Strategy for replacing FRUs Before replacing partsImportant notice for replacing a system board Important service informationOriginal part Important information about replacing RoHS compliant FRUsGeneral checkout What to do first Following are not covered under warrantyChecking the internal battery status Power system checkoutApproximate information about the battery status Accurate information about the battery statusLenovo B6000/B8000 Hardware Maintenance Manual Power management SecurityActivating/Deactivating the Display Feature Description SpecificationsLenovo B6000 / B8000 Screw notices FRU replacement noticesPlastic to plastic Logic card to plasticRemoving and replacing an FRU Peeling off the label on the rear cover Rear coverSeparating the rear cover using a suction tool Unlocking the central area of the rear cover Step Screw quantity Color Torque Screws on the holder of the speaker box Right speaker boxDisconnecting the speaker FPC Prying off the holder Removing the speaker box Hinge frame and pivot Disconnecting the main FPCRemoving the hinge frame with the main FPC at the left end Removing the hinge pivot Main camera Disconnecting the main camera FPCDetaching the main camera Screws fixing the left speaker box Left speaker boxScrews on the main antenna Main antennaPhillips flat-head, M1.4 × 1.5 Black N/A Screw on the WiFi antenna WiFi antennaWiFi antenna frame detached Important notices for handling PCB Main PcbaRemoving the conductive fiber Removing the USB FPC holder Disconnecting the FPC between the main Pcba and sub board Disconnecting the LCD FPC Removing the adhisive tapes Main Pcba removed 10 Unlock the main antenna FPC connector 12 Main antenna removed Screws on the sub board Sub boardDisconnecting the TP FPC Detaching the vibrator motor Pushing out the power button Power buttonFront view LocationsRear view Parts list Overall Lenovo B6000 / B8000 Parts list-Overall for Lenovo B6000 only Parts list-Overall for Lenovo B8000 only Screw Parts list-ScrewPage Trademarks