Lenovo B6000 / B8000
1090 Sub board
Important notices for handling PCB:
When handling PCB, bear the following in mind:
•Be careful not to drop the PCB onto a bench top that has a hard surface, such as surface made of metal, wood, or composite materials.
•Avoid rough handling of any kind.
•Make sure not to drop or stack the PCB in the whole process.
•Make sure to put the PCB only on surface covered with materials such as an ESD mat or conductive corrugated plate.
For access, remove this FRU:
• “1010 Rear cover” on page 28
1.Remove four screws a for fixing the sub board to the main body.
Figure 9-1 Screws on the sub board
55