Lenovo 8297, 8288, 8342, 8329, 8380 Selecting a startup device, Selecting a temporary startup device

Page 45

To set Security Profile by Device, do the following:

1.Start the Setup Utility program (see “Starting the Setup Utility program” on page 27).

2.From the Setup Utility program menu, select Security.

3.Select Security Profile by Device.

4.Select the desired devices and settings and press Enter.

5.Return to the Setup Utility program menu and select Exit and then Save Settings or Save and exit the Setup Utility.

Note: If you do not want to save the settings, select Exit the Setup Utility without saving.

Selecting a startup device

If your computer does not start up (boot) from a device such as the CD-ROM, diskette, or hard disk as expected, use one of the following procedures to select a startup device.

Selecting a temporary startup device

Use this procedure to startup from any boot device.

Note: Not all CDs, hard disks, and diskettes are startable (bootable).

1.Turn off your computer.

2.Press and hold the F12 key then turn on the computer. When the Startup Device Menu appears, release the F12 key.

Note: If you are using a USB keyboard and the Startup Device Menu does not display using this method, repeatedly press and release the F12 key rather than leaving it pressed when turning on the computer.

3.Select the desired startup device from the Startup Device Menu and press Enter to begin.

Note: Selecting a startup device from the Startup Device menu does not permanently change the startup sequence.

Changing the startup device sequence

To view or permanently change the configured startup device sequence, do the following:

1.Start the Setup Utility program (see “Starting the Setup Utility program” on page 27).

2.Select Startup.

3.Select Startup Sequence. See the information displayed on the right side of the screen.

4.Select the devices for the Primary Startup Sequence, the Automatic Startup Sequence, and the Error Startup Sequence.

5.Select Exit from the Setup Utility menu and then Save Settings or Save and exit the Setup Utility.

If you have changed these settings and want to return to the default settings, select Load Default Settings on the Exit menu.

Chapter 2. Using the Setup Utility 29

Page 44 Page 46
Image 45
Page 44 Page 46
Contents User Guide Types 8288, 8297 Types 8329, 8342 Page User Guide Types 8288, 8297 Types 8329, 8342 Page Contents Iv User Guide Conditions that require immediate action Important safety informationService General safety guidelinesPower cords and power adapters Extension cords and related devices Plugs and outletsBatteries Heat and product ventilation CD and DVD drive safetyAdditional safety information Lithium battery noticeTo connect To disconnect Laser compliance statement Modem safety informationPower supply statement Information resources OverviewXiv User Guide Features Installing optionsVideo subsystem Operating systems preinstalled varies by model type Specifications Tools required Available optionsHandling static-sensitive devices Installing external optionsLocating the connectors on the front of your computer Locating the connectors on the rear of your computer Obtaining device drivers Connector DescriptionRemoving the cover Locating components Identifying parts on the system board What to do next Installing memoryInstalling adapters What to do next Drive specifications Installing internal drivesInstalling options Installing a drive in bay 1 or bay Installing options Connecting the first optical drive Connecting drivesInstalling security features Connecting a serial ATA hard disk driveIntegrated cable lock Password protection Changing the batteryPadlock Erasing a lost or forgotten password clearing Cmos Replacing the cover and connecting the cables User Guide Starting the Setup Utility program Using the Setup UtilityViewing and changing settings Using passwordsAdministrator Password User PasswordSetting, changing, and deleting a password Using Security Profile by DeviceSelecting a startup device Selecting a temporary startup deviceChanging the startup device sequence Exiting from the Setup Utility program Advanced settingsUpdating flashing Bios from a diskette or CD-ROM Appendix A. Updating system programsSystem programs Recovering from a POST/BIOS update failure Updating flashing Bios from your operating systemAppendix B. Cleaning the mouse Cleaning an optical mouseCleaning a mouse with a ball User Guide Basic AT commands Appendix C. Manual modem commandsSet Pulse dial as default Low speaker volumeSet Tone Dial as default Internal speaker on until carrier detectedExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 2 commands Fax Class 1 commandsVoice commands Appendix C. Manual modem commands User Guide Appendix D. Notices Trademarks Television output noticeIndex Password lost or forgotten Page Part Number 41D4435
Top Page Image Contents