Lenovo 8329, 8288, 8342, 8297, 8380, 8326 manual Removing the cover

Page 26

Removing the cover

Important

Read “Important safety information” on page v and “Handling static-sensitive devices” on page 6 before removing the computer cover.

To remove the computer cover:

1.Shut down your operating system, remove any media (diskettes, CDs, or tapes) from the drives, and turn off all attached devices and the computer.

2.Unplug all power cords from electrical outlets.

3.Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer.

4.Remove any locking devices that secure the computer cover.

5.Remove the two screws at the rear of the right side cover and slide the computer cover to the rear to remove.

10User Guide

Image 26

Contents User Guide Types 8288, 8297 Types 8329, 8342 Page User Guide Types 8288, 8297 Types 8329, 8342 Page Contents Iv User Guide Important safety information Conditions that require immediate actionGeneral safety guidelines ServicePower cords and power adapters Batteries Extension cords and related devicesPlugs and outlets CD and DVD drive safety Heat and product ventilationTo connect To disconnect Additional safety informationLithium battery notice Modem safety information Laser compliance statementPower supply statement Overview Information resourcesXiv User Guide Installing options FeaturesVideo subsystem Operating systems preinstalled varies by model type Specifications Available options Tools requiredInstalling external options Handling static-sensitive devices Locating the connectors on the front of your computer Locating the connectors on the rear of your computer Connector Description Obtaining device driversRemoving the cover Locating components Identifying parts on the system board Installing memory What to do nextInstalling adapters What to do next Installing internal drives Drive specificationsInstalling options Installing a drive in bay 1 or bay Installing options Connecting drives Connecting the first optical driveConnecting a serial ATA hard disk drive Installing security featuresIntegrated cable lock Padlock Password protectionChanging the battery Erasing a lost or forgotten password clearing Cmos Replacing the cover and connecting the cables User Guide Viewing and changing settings Using the Setup UtilityStarting the Setup Utility program Using passwordsSetting, changing, and deleting a password User PasswordAdministrator Password Using Security Profile by DeviceChanging the startup device sequence Selecting a startup deviceSelecting a temporary startup device Advanced settings Exiting from the Setup Utility programSystem programs Updating flashing Bios from a diskette or CD-ROMAppendix A. Updating system programs Updating flashing Bios from your operating system Recovering from a POST/BIOS update failureCleaning a mouse with a ball Appendix B. Cleaning the mouseCleaning an optical mouse User Guide Appendix C. Manual modem commands Basic AT commandsSet Tone Dial as default Low speaker volumeSet Pulse dial as default Internal speaker on until carrier detectedExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 1 commands Fax Class 2 commandsVoice commands Appendix C. Manual modem commands User Guide Appendix D. Notices Television output notice TrademarksIndex Password lost or forgotten Page Part Number 41D4435