10.Align the drive cage pivot pin with the slot 1 in the upper drive cage and slide the hard disk drive cage into the chassis.
11.Connect the signal cable and the power cable to the new hard disk drive.
12.Press down on the metal latch 2 and pivot the drive cage into place, and then slide it to the front of the computer until it snaps into position.
Note: There are two arrows, one on the upper drive cage and one on the hard disk drive cage. The arrows are aligned when the hard disk drive is in the proper position.
Figure 22. Installing the primary hard disk drive
What to do next:
vTo work with another piece of hardware, go to the appropriate section.
vTo complete the replacement, go to “Completing the parts replacement” on page 40.
Replacing the secondary hard disk drive
Attention
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support
This section provides instructions on how to replace the secondary hard disk drive. Not all computers have the secondary hard disk drive.
Chapter 2. Installing or replacing hardware 29