Lenovo TS140 manual Updating the firmware, Using the Firmware Updater program

Page 46

•See “Deleting RAID volumes” on page 33 for RAID volume deletion.

•See “Creating RAID volumes” on page 33 for RAID volume creation.

•Use the up and down arrow keys to select Exit and press Enter.

Updating the firmware

The firmware in the server is periodically updated and the latest firmware is always available for downloading from the Lenovo Web site.

Go to http://www.lenovo.com/drivers and follow the instructions on the Web page to check for the latest level of firmware, such as the BIOS updates and device drivers.

When you replace a device in the server, you might have to either update the server with the latest version of the firmware that is stored in memory on the device or restore the preexisting firmware from a diskette or CD image.

Notes:

•The BIOS ROM file is stored in flash on the system board.

•The onboard SATA software RAID firmware is integrated into the BIOS ROM on the system board.

Using the Firmware Updater program

The Firmware Updater program enables you to maintain your system firmware up-to-date and helps you avoid unnecessary outages.

To update your system firmware using the Firmware Updater program, do the following:

Note: Before distributing the firmware updates to a server, ensure that your server can restart successfully without encountering hardware problems.

1.Go to http://www.lenovo.com/drivers and follow the instructions on the Web page to locate the Firmware Updater program.

2.Download the ISO image for the Firmware Updater program and the TXT file that contains installation instructions.

3.Use any CD or DVD burning software to create a bootable disc with the ISO image.

4.Print the TXT file and follow the instructions to use the Firmware Updater program to update your system firmware.

34ThinkServer TS140 User Guide

Image 46

Contents ThinkServer TS140 User Guide First Edition September Copyright Lenovo Contents Index Safety information 제품을 사용하기 전에 제품과 함께 제공되는 문서 DVD의 다국어 안전 지침을 주의 깊게 읽어보십시오在使用本产品之前，请务必先阅读和了解产品附带的文档 DVD 中的多语言安全说明。 Statement ≥ 18 kg 39.7 lb ≥ 32 kg 70.5 lb ≥ 55 kg 121.2 lb Vii Statement Following label indicates a potential heat hazard Copyright Lenovo ThinkServer TS140 User Guide General information IntroductionPrinted document Server documentationDocumentation DVD Safety, Warranty, and Support Information Document only for trained service personnelThinkServer TS140 User Guide Server setup road map ThinkServer TS140 User Guide Server package FeaturesProduct overview MicroprocessorMemory Power supplyInput/Output I/O features FansBasic system management features Reliability, availability, and serviceabilitySecurity features Ethernet connectivitySoftware SpecificationsThinkServer EasyStartup RAID configuration utilities ThinkServer EasyUpdate Firmware UpdaterBios update utilities Diagnostic programsFront view of the server Machine type, model, and serial number labelRear view of the server Following illustration shows the front view of the serverConnector Connector Description Locating parts on the system boardInternal components Internal drivesDrive bay locations ThinkServer TS140 User Guide Turning on the server Turning on and turning off the serverTurning off the server ThinkServer TS140 User Guide Starting the Setup Utility program Configuring the serverUsing the Setup Utility program Viewing information in the Setup Utility programMain menu Setup Utility program interfaceDevices menu Advanced menu Security menuStartup menu Setting the system date and timePower menu Exit menuUsing passwords Configuring the TPM function Selecting a startup deviceUpdating or recovering the Bios Exiting from the Setup Utility programUpdating flashing the Bios Using the ThinkServer EasyStartup program Recovering from a Bios update failureFeatures of the ThinkServer EasyStartup program Starting the ThinkServer EasyStartup programCompatibility notes Install operating systemHome User GuideConfiguring RAID About RAIDSelect Devices ATA Drive Setup Deleting RAID volumes Creating RAID volumesResetting disks to non-RAID Using the Firmware Updater program Updating the firmwarePrecautions Installing, removing, or replacing hardwareGuidelines Handling static-sensitive devices System reliability guidelines Working inside the server with the power onRemoving the server cover Removing and reinstalling the front bezel Removing the server coverRemoving the front bezel Installing, removing, or replacing hardware What to do nextInstalling or removing a memory module Installing or removing the Ethernet cardMemory module installation rules Dimm DIMM1 DIMM2 DIMM3 DIMM4 Installing a memory module Opening the retaining clips of the memory slotsInstalling a memory module Removing a memory moduleInstalling or removing the tertiary hard disk drive Installing the tertiary hard disk driveInstall the retainer on the side of the bracket Connecting cables to the hard disk drive Removing the tertiary hard disk drive Removing the drive conversion bracket Installing the slim optical drive conversion board Installing the slim optical drive retainer Install the cage retainer on the side of the cage Sliding the cage into the optical drive bay What to do next Removing the slim optical drive from the cage Installing or replacing a PCI card Removing the hard disk drive from the cageOpening the PCI card latch Opening the PCI card retaining clip Installing a PCI card Installing or replacing the optical drive Removing the optical driveInstalling or replacing the secondary hard disk drive Installing the optical driveRemoving the secondary hard disk drive Installing the hard disk drive into the bracket Connecting a Sata hard disk drive Replacing the primary hard disk driveRemoving the primary hard disk drive Replacing the power supply assembly Installing the primary hard disk driveInstalling, removing, or replacing hardware Removing the screws that secure the power supply assembly Replacing the heat sink and fan assembly Removing the heat sink and fan assembly Replacing the front audio and USB assembly Removing the front audio and USB assemblyReplacing the front fan assembly Removing the front fan assemblyReplacing the rear fan assembly Installing the front fan assemblyRemoving the rear fan assembly Installing the rear fan assembly Replacing the microprocessorAccessing the microprocessor Installing the microprocessor Replacing the system board battery Completing the parts replacement Removing the old system board batteryConnecting the cables Reinstalling the server coverInstalling security features Connecting external devicesUpdating the server configuration Password protectionThinkServer TS140 User Guide Troubleshooting procedure Troubleshooting and diagnosticsUsing a diagnostic program ThinkServer EasyStartup program problems Basic troubleshooting tablesOptical drive problems Hard disk drive problems Memory module problems Keyboard, mouse, or USB device problems Restart the server Replace the USB device Information resources Getting information, help, and serviceUsing the documentation ThinkServer Web siteCalling for service Help and serviceBefore you call Using other services Purchasing additional servicesThinkServer TS140 User Guide Appendix A. Notices Important notes TrademarksParticulate contamination Battery return program Contaminant LimitsBattery recycling information for the European Union Important Weee information Restriction of Hazardous Substances Directive RoHSChina RoHS Turkish RoHS German Ordinance for Work gloss statement India RoHSEuropean Union RoHS Export classification noticeIndustry Canada Class a emission compliance statement United Kingdom telecommunications safety requirementDeutschland Appendix A. Notices Eurasian compliance mark Energy Star model information Index 103RAID 105 ThinkServer TS140 User Guide