Power cord, Video cable, Power Source

Power Source:

1.Make sure the power cord is the correct type that is required in your area.

2.This monitor has a universal power supply that allows operation in 100/120V ac or 220/240V ac voltage (No user adjustment is required)

3.Connect the power cord into your monitor’s power input socket, and then plug the other end into a 3-pin ac power outlet. The power cord can be connected to either a wall power outlet or the power outlet socket on your computer, depending on the type of power cord supplied with your monitor.

Power cord:

For safe operation, use the power cord supplied with the unit.

Video cable

Connecting the video cable: The monitor comes with a built-in video cable. Plug the signal cable's 15-pin connector into the computer's video port and tighten the two screws on the cable connector. (see figure 2)

Connecting the power cord: Plug the power cord into the monitor's ac power socket. Then plug the power cord into a grounded ac outlet or UL- approved power strip or the power output socket on your computer.

Caution: If the AC outlet is not grounded(only two holes), install the proper grounding adapter (not supplied).

1	2

Figure 2 Connecting cables

1.Power Cord

2.Signal Cable