Lenovo E54 INSTALLATION INSTRUCTIONS Swivel Base, Rest, Back, Hands, Eyesight, Screen settings

Page 9
Rest

Rest

Take regular breaks. Vary your posture, and stand up and stretch occasionally, as prolonged use of computer workstations can be tiring.

Back

Sit back in the chair and use the back rest.

Hands

Use a light touch on the keyboard, keeping your hands and fingers relaxed. Allow a space in front of the keyboard to rest your wrists when not typing. Consider using a wristpad.

Eyesight

Working with monitors, in common with any prolonged close work, can be visually demanding. Look away from the screen periodically and have your eyesight checked regularly.

Screen settings

Set the screen brightness and contrast to a comfortable level. You might have to adjust this as the lighting changes during the day. Many application programs let you select color combinations which can help you to view in comfort.

INSTALLATION INSTRUCTIONS

Swivel Base

To attach the swivel base to the monitor, do the following:

Carefully turn the monitor on its side or upside down. (see figure 1)

Locate the cavities at the bottom front of the monitor.

Insert the pegs on the swivel base into these cavities. Push the swivel base forward until the swivel base locks in place.

To remove the swivel base, hold the bottom of the swivel base, and then push it out.

Figure 1 Installing and removing the Swivel Base

7

Image 9
Contents Page íí í Copyright lenovo 2006,2005 portionc IBM corp,2004 All rights reserved Fourth Edition JulyLenovo United States, Inc 500 Park Offices Drive, Hwy NoticesResearch Triangle Park, NC U.S.A Attention Lenovo Director of LicensingTrademarks Further Help PACKING LIST Installing the Device DriverContents Installation InstructionsWork Practices Caring for your Monitor PRECAUTIONS Workplace preparationScreen settings INSTALLATION INSTRUCTIONS Swivel BaseRest BackPower cord Power SourceVideo cable EXTERNAL CONTROLS OPERATING INSTRUCTIONS General InstructionsHow to adjust a setting Power IndicatorFront Panel Control ADJUSTING THE PICTURE FEATURES Green monitor Plug & Play DDC2B Feature Plug and playDDC/CI TECHNICAL SUPPORT FAQ 362 In mm APPENDIX A - SPECIFICATIONSBrightness SRGBOSD Display Time Connector pin assignment APPENDIX B - FACTORY PRESET TIMING TABLEInstalling the Device Driver Installing the Device Driver for Windows 95 or WindowsIf you are using Windows Installing the Device Driver for Windows 2000 or Windows Me Installing the device driver in Windows XP Installing the device driver in Windows Vista Service Information Model Type 6331for E54Customer responsibilities