Lenovo E54 manual Adjusting The Picture

ADJUSTING THE PICTURE

The description for function control ICONS

1.	CONTRAST	Adjust the picture contrast.
2.	BRIGHTNESS	Adjust the picture brightness.
3.	H- CENTER	Adjust the horizontal position of the picture.
4.	H- SIZE	Adjust the picture’s horizontal size.
5.	V- CENTER	Adjust the vertical position of the picture.
6.	V- SIZE	Adjust the picture’s vertical size.
7.	ZOOM	Adjust the picture’s horizontal and vertical		size
		simultaneously.
8.	PINCUSHION	Adjust the pincushion and barrel
9.	TRAPEZOID	Adjust the picture’s trapezoid distortion.
10.	PIN-BALANCE	Adjust to compensate the pincushion unbalance.
11.	PARALLELOGRAM	Adjust the picture to be a rectangle.
12.	ROTATION	Adjust the picture tilt to horizontal position.
	6500°K/9300°K/SRGB	The color temperature for 6500°K is x=0.313,
13.	(COLOR	y=0.329	and 9300°K is x=0.283, y=0.297,
		SRGB is	x=0.313,y=0.329,It presents three
	TEMPERATURE )
		different color sets on the screen. You can
		select 9300°K or 6500°K or SRGB by pressing
		the MENU. Brightness and contrast can't be
		adjusted in SRGB mode.
14.	USER COLOR	If the 9300°K normal white or 6500°K warmer
		white do not satisfy your desire, properly adjust R
	( Red / Blue )
		. B GAIN controls to obtain your optimum
		whiteness level.
15.	DEGAUSS	If color	impurity occurs when moving	or
		swiveling the monitor, press the MENU and
		degauss to fix the picture condition.
16.	MOIRE REDUCE	Moire is the result of interference between the
		phosphor layout and the video signal. In some
		cases, you may find the moire very noticeable.
		Press the MENU to enter in the moire reduce
		setting. Please adjust the level to the optimum
		condition. Note: Too high of a setting will cause
		the picture to shake.

17.

18.

19.

20.

RECALL	Press RECALL to restore the monitor to factory
	settings.
EXIT	Close OSD window.
SELECT LANGUAGE	Select the language you like.
OSD display time	Select the OSD display time: 5s,10s,or 15s.

11