Lenovo E54 manual PRECAUTIONS Workplace preparation, Work Practices Caring for your Monitor

Page 8

PRECAUTIONS

Workplace preparation

Positioning the monitor

Choose a suitable place to position the monitor where it is not near fluorescent desk lighting or any equipment that produces magnetic fields that could cause interference. Ensure that the furniture or equipment can support the weight of the monitor. Allow at least 2 in. (50 mm) ventilation space around the monitor.

Height

The monitor should be positioned so that the top of the screen is slightly below your eye level when you sit at your workstation.

Orientation

Choose a position that gives the least reflection from lights and windows, usually at a right angle to any windows. Position the monitor directly in front of you so that you do not have to twist your body. Tilt the monitor to a comfortable viewing angle.

Work Practices

Caring for your Monitor

Be sure to disconnect the power cord from your monitor before you perform any maintenance on the monitor. Clean your monitor as follows:

Gently wipe the covers and the screen with a soft cloth, do not use solvents or abrasives.

Never drop water or other liquid into your monitor.

Remove finger marks and grease with a damp cloth and mild detergent.

Never use flammable cleaning materials to clean your Lenovo monitor or any other electrical apparatus.

Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as a ballpoint pen or screwdriver. This type of contact may result in a scratched picture tube.

Do not use any type of cleaner containing an anti-static solution or similar additive as this may scratch the screen's coating.

Never apply detergent or other liquid directly to the screen. Dampen the cloth and then wipe.

6

Image 8
Contents Page íí í Fourth Edition July Copyright lenovo 2006,2005 portionc IBM corp,2004 All rights reservedNotices Lenovo United States, Inc 500 Park Offices Drive, HwyResearch Triangle Park, NC U.S.A Attention Lenovo Director of LicensingTrademarks Further Help Installing the Device Driver PACKING LISTContents Installation InstructionsPRECAUTIONS Workplace preparation Work Practices Caring for your MonitorINSTALLATION INSTRUCTIONS Swivel Base Screen settingsRest BackVideo cable Power cordPower Source OPERATING INSTRUCTIONS General Instructions EXTERNAL CONTROLSFront Panel Control How to adjust a settingPower Indicator ADJUSTING THE PICTURE FEATURES Green monitor DDC/CI Plug & Play DDC2B FeaturePlug and play TECHNICAL SUPPORT FAQ APPENDIX A - SPECIFICATIONS 362 In mmOSD Display Time BrightnessSRGB APPENDIX B - FACTORY PRESET TIMING TABLE Connector pin assignmentIf you are using Windows Installing the Device DriverInstalling the Device Driver for Windows 95 or Windows Installing the Device Driver for Windows 2000 or Windows Me Installing the device driver in Windows XP Installing the device driver in Windows Vista Customer responsibilities Service InformationModel Type 6331for E54