Notes
•Do not install the monitor in a location near heat sources such as radiators or air ducts , or in a place subject to direct sunlight , or excessive dust or mechanical vibration or shock.
•Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor.
•For maximum protection, repackage your monitor as it was originally packed at the factory.
•To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains can be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.
Front Panel Control
•Power : Press this knob to switch ON/OFF of monitor’s power.
•MENU : Active OSD menu or function adjust confirm.
•Contrast
/ 
: Adjust contrast or function adjust.
•Brightness 
/ 
: Adjust brightness or function adjust.
•EXIT : Exit a function or inactive OSD menu.Press and
hold the "Exit" button for 10 seconds to disable/enable the DDC/CI function.The words "DDC/CI function disable/enable will be showed on the screen.
•Power Indicator :
Green — Power On mode. Orange — Sleep or Off mode.
How to adjust a setting
The monitor controls are accessed by pressing button MENU to enable OSD
Figure 4 The OSD Message
Note: If adjustment or selection of any OSD menu is not made for more than 10 seconds, the current setup will be saved and the OSD will disappear automatically.
10