Installing the device driver in Windows Vista

Update Driver

To install the device driver in Microsoft® Windows Vista, do the following:

Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in Windows Vista.

1.Turn off the computer and all attached devices.

2.Ensure that the monitor is connected correctly.

3.Turn on the monitor and then the system unit. Allow your computer to start the Windows Vista operating system.

4.Open the Display Properties window by clicking Start, Control Panel

and then double-clicking the Hardware and Sound icon. 5. Click the Personalization icon.

6.Click the Display Settings icon.

7.Click the Advanced Settings button.

8.Click the Monitor tab.

9.Click the Properties button.

10. Click the Driver tab.

11. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on and then click the "Browse my computer for driver software" button.

12. Select “Let me pick from a list of device drivers on my computer” .

13. Insert the Lenovo Monitor CD into the CD drive and click the Have Disk button.

14. Ensure that the CD drive letter is selected, and then click OK.

15.Select E54 monitor and click Next. The files will be copied from the CD to your hard disk drive.

16.Close all open windows and remove the CD.

17.Restart the computer.

The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.