Lenovo 1106, 1098, 1105, 1100 manual Installing or replacing the secondary hard disk drive

Page 43

9.Connect one end of the signal cable to the hard disk drive and the other end to an available SATA connector on the system board. See “Locating parts on the system board” on page 11. Then, locate an available five-wire power connector and connect it to the hard disk drive.

Figure 22. Connecting a SATA hard disk drive

What to do next:

•To work with another piece of hardware, go to the appropriate section.

•To complete the replacement, go to “Completing the parts replacement” on page 48.

Installing or replacing the secondary hard disk drive

Attention:

Do not open your server or attempt any repair before reading and understanding the Safety Information and the Warranty and Support Information on the ThinkServer Documentation DVD that came with your product, and “Guidelines” on page 15. To obtain a copy of the publications, go to:

http://www.lenovo.com/support

To install or replace the secondary hard disk drive, do the following:

1.Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the server.

2.Remove the server cover. See “Removing the server cover” on page 17.

3.Locate the secondary hard disk drive. See “Locating parts on the system board” on page 11 and “Internal drives” on page 13.

4.If you are replacing the secondary hard disk drive, disconnect the signal cable and the power cable from the hard disk drive.

Chapter 5. Installing, removing, or replacing hardware 31

Image 43

Contents ThinkServer User Guide First Edition May Copyright Lenovo Contents Information resources Iii Safety informationStatement Do not ≥ 18 kg 39.7 lb ≥ 32 kg 70.5 lb ≥ 55 kg 121.2 lb Vii Viii ThinkServer User Guide Copyright Lenovo ThinkServer User Guide Introduction General informationRelated documentation Task Where to find the information Server setup road mapThinkServer User Guide Features and specifications What is included with your serverProduct overview Memory System management featuresInput/Output I/O features Preinstalled operating systemSoftware programs Reliability, availability, and serviceabilityEasyStartup ThinkServer User Guide Front view Locating parts, controls, and connectorsRear view Connector Description System board part locations Locating parts on the system boardComponent locations Internal componentsMachine type and model label Internal drivesFollowing is a sample of the machine type and model label Guidelines Installing, removing, or replacing hardwareBasic guidelines Handling static-sensitive devices System reliability guidelinesRemoving the server cover Removing the server cover Removing and reinstalling the front bezelRemoving the front bezel Installing or replacing a PCI card Installing, removing, or replacing optional hardware devicesOpening the PCI card latch Removing a PCI card Installing a PCI card Installing or removing the Ethernet cardInstalling or removing a memory module Removing a memory module Installing a memory module Installing or replacing the optical driveRemoving the optical drive Replacing the primary hard disk drive Connecting a Sata optical driveRemoving the primary hard disk drive Installing the primary hard disk drive Connecting a Sata hard disk drive Installing or replacing the secondary hard disk driveRemoving the secondary hard disk drive Installing the secondary hard disk drive Installing, removing, or replacing hardware devices Replacing the power supply assembly Removing the screws that secure the power supply assembly Replacing the heat sink and fan assembly Removing the heat sink and fan assembly Removing the front audio and USB assembly Replacing the front audio and USB assemblyReplacing the front fan assembly Removing the front fan assembly Installing the front fan assembly Replacing the rear fan assemblyRemoving the rear fan assembly Replacing the microprocessor Installing the rear fan assemblyAccessing the microprocessor Installing the microprocessor Replacing the system board battery Removing the old system board battery Completing the parts replacementTurning on the server Connecting the cablesTurning off the server Connecting external devicesIntegrated cable lock Updating the server configurationInstalling security features Password protectionThinkServer User Guide Introduction of the Bios items Configuring the serverUsing the Setup Utility program Starting the Setup Utility programUuid Option or descriptionOption Description IGD/PEG/PCISubmenus under the Serial Port Setup menu Submenus under the Video Setup menu Submenus under the Network Setup menu CPU ID VT-UTF8 Ascii Under the SOL Configuration menuLAN Under the Automatic Power OnItems under the Security menu Under the System Event Log menu Under the Hard Disk PasswordUnder the Fingerprint Setup menu Under the TCG Feature SetupSubmenus under the Fingerprint Setup menu Items under the Startup menu Using passwords Viewing and changing settingsPassword considerations External Sata Port USB SetupEnabling or disabling a device Sata ControllerRAID level Exiting from the Setup Utility programConfiguring RAID Selecting a startup deviceDeleting RAID volumes Creating RAID volumesUsing the EasyUpdate Firmware Updater program Resetting disks to non-RAIDUpdating the firmware Using system programs Using the ThinkServer EasyStartup programUpdating system programs Updating flashing the Bios from your operating system Updating flashing the Bios from a discRecovering from a POST/BIOS update failure Symptom Action Troubleshooting and diagnosticsBasic troubleshooting General problemsPC-Doctor for DOS Creating a diagnostic disc EasyStartup problemsRunning the diagnostic program from a diagnostic disc Troubleshooting and diagnostics ThinkServer User Guide Information resources Safety and WarrantyLenovo Support Web site ThinkServer User Guide Using the documentation Help and serviceCalling for service Purchasing additional services Using other servicesAppendix A. Notices Trademarks Appendix A. Notices Important information for the European Directive 2002/96/EC Appendix A. Notices ThinkServer User Guide Particulate contamination Contaminant Limits Restriction of Hazardous Substances Directive RoHSChina RoHS Turkish statement of compliance Electronic emission notices German Ordinance for Work gloss statementFederal Communications Commission FCC Statement Appendix A. Notices ThinkServer User Guide CRU IndexAdministrator Considerations Server configuration ThinkServer User Guide