Lenovo 1106, 1098 Software programs, EasyStartup, Reliability, availability, and serviceability

Page 19

Table 2. Features and specifications (continued)

Integrated functions:

•Ethernet controllers (The server comes with two integrated Gigabit Ethernet controllers, which support connection to 100 Mbps or 1000 Mbps network.)

•One serial port

•One Video Graphics Array (VGA) monitor connector

•Six USB connectors (two front and four rear)

•One RJ-45 Ethernet connectors on the rear panel

•Eight diagnostic LEDs

Size:

•Width: 174.8 mm (6.88 inches)

•Height: 377.3 mm (14.85 inches)

•Depth: 406.7 mm (16.01 inches)

Weight: Maximum configuration: 11.2 kg (24.7 lbs)

Electrical input

•Input voltage:

– Low range:

Minimum: 90 V ac

Maximum: 137 V ac

– High range:

Minimum: 180 V ac

Maximum: 264 V ac

Environment

• Air temperature:

Operating: 10°C to 35°C (50°F to 95°F)

Non-operating: -40°C to 60°C (14°F to 140°F) (with package)

Non-operating: -10°C to 60°C (14°F to 140°F) (without package)

• Humidity:

Operating: 10% to 80% (non-condensing) (10% per hour)

Non-operating: 10% to 90% (non-condensing) (10% per hour)

• Altitude:

Operating: -50 to 10 000 ft (-15.2 to 3 048 m)

Non-operating: -50 to 35 000 ft (-15.2 to 10 668 m)

Security features

•Computrace

•Enabling or disabling a device

•Enabling or disabling USB connectors individually

•Hard disk drive password

•Power-On Password (POP) and Administrator Password for UEFI access

•Startup sequence control

•Startup without keyboard or mouse

•Support for an integrated cable lock (Kensington lock)

•Support for a padlock

•Trusted Platform Module (TPM)

Software programs

Lenovo provides software to help get your server up and running.

EasyStartup

The ThinkServer EasyStartup program simplifies the process of configuring RAID and installing supported Microsoft Windows operating systems and device drivers on your server. The EasyStartup program is provided with your server on the ThinkServer EasyStartup DVD. The DVD is self-starting (bootable). The user guide for the EasyStartup program is on the DVD and can be accessed directly from the program interface. For additional information, see “Using the ThinkServer EasyStartup program” on page 72.

Reliability, availability, and serviceability

Reliability, availability, and serviceability (hereafter referred to as RAS) are three important server design features. The RAS features help you to ensure the integrity of the data stored on the server, the availability of the server when you need it, and the ease with which you can diagnose and correct problems.

The server has the following RAS features:

Chapter 3. Product overview 7

Page 18 Page 20
Image 19
Page 18 Page 20
Contents ThinkServer User Guide First Edition May Copyright Lenovo Contents Information resources Iii Safety informationStatement Do not ≥ 18 kg 39.7 lb ≥ 32 kg 70.5 lb ≥ 55 kg 121.2 lb Vii Viii ThinkServer User Guide Copyright Lenovo ThinkServer User Guide Introduction General informationRelated documentation Task Where to find the information Server setup road map ThinkServer User Guide Features and specifications What is included with your serverProduct overview Memory System management featuresInput/Output I/O features Preinstalled operating systemSoftware programs Reliability, availability, and serviceabilityEasyStartup ThinkServer User Guide Front view Locating parts, controls, and connectorsRear view Connector Description System board part locations Locating parts on the system boardComponent locations Internal componentsMachine type and model label Internal drivesFollowing is a sample of the machine type and model label Guidelines Installing, removing, or replacing hardwareBasic guidelines Handling static-sensitive devices System reliability guidelinesRemoving the server cover Removing the server cover Removing and reinstalling the front bezelRemoving the front bezel Installing or replacing a PCI card Installing, removing, or replacing optional hardware devicesOpening the PCI card latch Removing a PCI card Installing a PCI card Installing or removing the Ethernet cardInstalling or removing a memory module Removing a memory module Installing a memory module Installing or replacing the optical driveRemoving the optical drive Replacing the primary hard disk drive Connecting a Sata optical driveRemoving the primary hard disk drive Installing the primary hard disk drive Connecting a Sata hard disk drive Installing or replacing the secondary hard disk driveRemoving the secondary hard disk drive Installing the secondary hard disk drive Installing, removing, or replacing hardware devices Replacing the power supply assembly Removing the screws that secure the power supply assembly Replacing the heat sink and fan assembly Removing the heat sink and fan assembly Removing the front audio and USB assembly Replacing the front audio and USB assemblyReplacing the front fan assembly Removing the front fan assembly Installing the front fan assembly Replacing the rear fan assemblyRemoving the rear fan assembly Replacing the microprocessor Installing the rear fan assemblyAccessing the microprocessor Installing the microprocessor Replacing the system board battery Removing the old system board battery Completing the parts replacementTurning on the server Connecting the cablesTurning off the server Connecting external devicesIntegrated cable lock Updating the server configurationInstalling security features Password protectionThinkServer User Guide Introduction of the Bios items Configuring the serverUsing the Setup Utility program Starting the Setup Utility programUuid Option or descriptionOption Description IGD/PEG/PCISubmenus under the Serial Port Setup menu Submenus under the Video Setup menu Submenus under the Network Setup menu CPU ID VT-UTF8 Ascii Under the SOL Configuration menuLAN Under the Automatic Power OnItems under the Security menu Under the System Event Log menu Under the Hard Disk PasswordUnder the Fingerprint Setup menu Under the TCG Feature SetupSubmenus under the Fingerprint Setup menu Items under the Startup menu Using passwords Viewing and changing settingsPassword considerations External Sata Port USB SetupEnabling or disabling a device Sata ControllerRAID level Exiting from the Setup Utility programConfiguring RAID Selecting a startup deviceDeleting RAID volumes Creating RAID volumesUsing the EasyUpdate Firmware Updater program Resetting disks to non-RAIDUpdating the firmware Using system programs Using the ThinkServer EasyStartup programUpdating system programs Updating flashing the Bios from your operating system Updating flashing the Bios from a discRecovering from a POST/BIOS update failure Symptom Action Troubleshooting and diagnosticsBasic troubleshooting General problemsPC-Doctor for DOS Creating a diagnostic disc EasyStartup problemsRunning the diagnostic program from a diagnostic disc Troubleshooting and diagnostics ThinkServer User Guide Information resources Safety and WarrantyLenovo Support Web site ThinkServer User Guide Using the documentation Help and serviceCalling for service Purchasing additional services Using other servicesAppendix A. Notices Trademarks Appendix A. Notices Important information for the European Directive 2002/96/EC Appendix A. Notices ThinkServer User Guide Particulate contamination Contaminant Limits Restriction of Hazardous Substances Directive RoHSChina RoHS Turkish statement of compliance Electronic emission notices German Ordinance for Work gloss statementFederal Communications Commission FCC Statement Appendix A. Notices ThinkServer User Guide CRU IndexAdministrator Considerations Server configuration ThinkServer User Guide
Top Page Image Contents