Sanyo WM5500L, PLC-WM5500 owner manual Installation Lens Installation, Removing the lens

Page 18

Installation

Lens Installation

When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications.

 

Removing the lens

 

1

Shift the lens to the center position by using the Lens

shift function (p.27).

2

Turn off the projector and unplug the AC power cord.

3

While pressing the Lens release button on the top

of the cabinet, turn the lens counterclockwise until

it stops and pull it out slowly from the projector.

CAUTION

Be careful when handling the lens. Do not drop.

Attaching the lens to the projector

1

Remove the lens mount cover.

2

Fit the lens to the projector by aligning the red dot on

 

the lens with the red dot of the projector.

3

Slowly turn the lens clockwise until it clicks. Make sure

that the lens is fully inserted to the projector.

CAUTION

Do not press the lens release button when attaching the lens.

Lens release button

Red dots

NOTES ON LENS INSTALLATION

Do not touch or remove any parts except the lens and related parts. It may result in malfunctions, electrical shock, fire hazard or other accidents.

Before installing or replacing the lens, check that the Model No. of the Projection Lens matches to the projector.

For details of the lens and installation, contact the sales dealer where you purchased the projector.

18

Image 18
Contents Model PLC-WM5500 PLC-WM5500L Network SupportedFeatures and Design Functionally Rich Multilanguage Menu DisplayTable of Contents Safety Precaution To The OwnerSafety Instructions Safety Instructions Air Circulation Top PanelPositioning Precautions Safety Instructions Moving the Projector AC Power Cord for the United States and Canada AC Power Cord for the United KingdomCompliance Front ⑱ Adjustable FeetPart Names and Functions Back Bottom① Infrared remote receiver Back ⑮ USB Connector Series BPart Names and Functions Rear Terminal Kensington Security SlotPart Names and Functions Side Control and Indicators Part Names and Functions Remote Control ⑮ D..ZOOM button ⑳ RESET/ON/ALL-OFF switch㉕ P-TIMER button ⑯ Input 1- 3 buttonsRemote Control Receivers and Operating Range Wired Remote Control TransmitterPart Names and Functions Remote Control Code Adjustable FeetLens shift adjustable range InstallationLens Shift Adjustment Positioning the ProjectorInstallation Lens Installation Removing the lensInstallation Connecting to a Computer Digital and Analog RGB Analog Out Signal Table Input TerminalInstallation Connecting for Audio Signal For the U..K Installation Connecting the AC Power CordProjector side For the U..S..A.. and Canada For Continental EuropeBasic Operation When using side controlWhen using remote control Turning On the ProjectorWhat is PIN code? Basic OperationTurning Off the Projector Basic Operation How to Operate the On-Screen Menu Remote ControlOn-Screen Menu Basic Operation Menu Bar Basic Operation Operating with Projector Control Lens OperationSide Control Basic Operation Sound Adjustment Direct OperationMenu Operation Screen button Basic Operation Operating with Remote ControlAuto PC button Information MenuPointer button Timer buttonMouse Pointer button Freeze buttonBasic Operation Keystone Correction StandardCorner correction Dot Arrow Finger Wireless Mouse OperationBasic Operation Pointer Function Click buttonInput Selection Side Control/Remote Control OperationRemote Control Operation Direct OperationInput Selection Computer Input Source Selection Rgbpc analogInput Selection Video Input Source Selection RGBScartVideo Pb/Cb,Pr/Cr Automatic Multi-Scan System Computer InputComputer System Selection Selecting Computer System ManuallyTo store the adjusted parameters Computer Input Auto PC AdjustmentPC adjust Menu Auto PC adjComputer Input Manual PC Adjustment Computer Input ResetMode free StoreStandard Image select MenuDynamic RealComputer Input Image Adjustment Image adjust MenuScreen Size Adjustment Digital zoom Custom adjDigital zoom + Position H/VKeystone Ceiling Rear Video Jack or S-video Jack Video InputVideo System Selection Pb/Cb, Pr/Cr JacksNatural Video InputDynamic CinemaVideo Input Image Adjustment ColorTint Store Noise reductionProgressive Wide169 Video Input Screen Size AdjustmentCustom adj Natural WideCeiling Setting Menu Language Input button SettingSetting LanguageDisplay Logo Logo and Logo PIN code lock settingsLogo select BackgroundLogo PIN code lock CaptureLogo PIN code lock Enter a Logo PIN code Change the Logo PIN code lock settingChange the Logo PIN code lock setting Enter a Logo PIN codePicture in Picture Hdmi setup Hdmi setupSound Lamp control Lamp replacement iconLamp life control Lamp life controlFilter control Simple modeRemote control Fan controlPower management Standby modeRC sensor Timer Direct onPointer Security Key lock and PIN code lock Key lockPIN code lock Change the PIN code lock setting Enter a PIN codePIN code change Shutter Closed caption Video delay controlClosed caption CC3 or CC4Test pattern Factory defaultFilter counter Filter counterMaintenance and Care Filter InstructionsMaintenance and Care Replacing the Filter Cartridge RecommendationFilter counter Reset? Maintenance and Care Resetting the Filter CounterResetting the Scroll Counter Scroll counter Reset?Maintenance and Care Lamp Replacement Follow these steps to replace the lampLamp Handling Precautions Maintenance and CareMaintenance and Care Cleaning the Projection Lens Cleaning the Projector CabinetThen check the matters below Troubleshooting AppendixAppendix Wireless mouse function Power is turned offRemote Control does Indicators blink or lightAppendix Menu Tree Computer Input/HDMI Input/Video InputComputer Input Screen Hdmi Input/Video InputVideo Input ScreenSetting SettingAppendix Indicators and Projector Condition IndicatorsProjector is operating normally Projector is detecting abnormal condition Lamp ReplaceReplacement icon appears on the screen and the Warning Appendix Compatible Computer Specifications DisplayWSXGA+ Appendix Technical Specifications Mechanical InformationAppendix Optional Parts Lens ReplacementTo the sales and service engineers PJ Link NoticeAppendix Configurations of Terminals InputOutput Appendix PIN Code Number Memo Factory default set No 1 2 3Factory default set No 4 3 2 PIN Code Lock NoAppendix Dimensions Operation Appendix List of Picture in PictureSerial Control Interface NoteFunctional Execution Command FormatStatus Read Command FormatEx. S1 = 12.3˚C, S2 = 23.4˚C, S3 = 34.5˚C KK8AL

PLC-WM5500, WM5500L specifications

The Sanyo WM5500L, also known as PLC-WM5500, is a high-performance projector designed to deliver exceptional image quality and versatility for various applications, including business presentations, educational use, and home entertainment. This projector integrates cutting-edge technology with user-friendly features, making it a popular choice among professionals and casual users alike.

One of the standout features of the Sanyo WM5500L is its impressive brightness. With a brightness rating of 5000 ANSI lumens, this projector is capable of delivering clear and vivid images, even in well-lit environments. This makes it an ideal choice for large venues such as auditoriums, conference rooms, and classrooms, where ambient light can be a challenge. The high brightness level ensures that images remain sharp and easy to read, regardless of the lighting conditions.

The projector employs advanced LCD technology, which is known for producing true-to-life colors and excellent contrast ratios. The Sanyo WM5500L features a resolution of 1024 x 768 pixels (XGA), providing a good balance between image detail and performance. The combination of high brightness and effective color reproduction makes it suitable for displaying presentations, videos, and images with a high degree of clarity and vibrancy.

Another notable characteristic of the WM5500L is its connectivity options. The projector is equipped with multiple input terminals, including HDMI, VGA, and composite video, allowing users to connect various devices such as laptops, Blu-ray players, and gaming consoles easily. This versatility ensures compatibility with a wide range of audio-visual equipment, making it an excellent choice for diverse usage scenarios.

In addition to its excellent image quality and connectivity, the Sanyo WM5500L is designed with user convenience in mind. It features adjustable lens shift capabilities, ensuring that users can position the projector flexibly without compromising image quality. The built-in 10-watt speaker enhances the audio experience, making it suitable for presentations that require accompanying sound without the need for external speakers.

Finally, the reliable durability of the Sanyo WM5500L, coupled with its energy-efficient design, ensures that users enjoy a long-lasting, cost-effective projection solution. Overall, the Sanyo WM5500L (PLC-WM5500) stands out in the market as a powerful, reliable projector that meets the diverse needs of its users, combining advanced technology, high-quality imaging, and ease of use. This projector is undoubtedly a valuable addition to any professional or educational setting.