Setting
Frame lock
Set the Frame Lock to Main picture or Sub picture.
Reset
Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at Yes.
Mode free
Delete the data stored in the Mode and return to Free. Use the Point ▲▼ buttons to select Mode free and press the SELECT button to show the Where to free? dialog box. Move the highlight to one of the mode (User1 - 5) which you want to delete and press the SELECT button. Then the confirmation box appears. To delete, select Yes.
Store
Store the adjusted data in the User
-5) which you want to store and press the SELECT button. Then the confirmation box appears. To store adjusted data, select Yes.
HDMI setup
This function is only used for HDMI input source.
Image
Select Normal or Enhanced to match the video range setting of your HDMI Digital RGB equipment.
Sound
HDMI: When using the HDMI cable, select HDMI. Both video and audio are transferred and you need not to connect any additional cables for audio.
AUDIO 1 : When using the
COMPUTER/COMPONENT AUDIO IN terminal.
The names for the output setting of Digital RGB vary from equipment to equipment. For details, refer to the owner’s manual of your Digital RGB equipment.
When the black parts of the image are destroyed or stand out, please switch to Normal or Enhanced, and then switch the output type of the HDMI Digital RGB output equipment.
To store the adjusted data.
Stored data
Vacant
Return to Picture in Picture menu.
HDMI setup
56