Sanyo PLC-WM5500, WM5500L owner manual Basic Operation, Turning On the Projector, Enter a PIN code

Page 23

Basic Operation

Turning On the Projector

1

Complete peripheral connections (with a computer, VCR, etc.)

before turning on the projector.

2

Connect the projector’s AC power cord into an AC outlet. The

LAMP indicator lights red and the POWER indicator lights

 

green.

3

Press the ON/STAND-BY button on the side control or the ON

button on the remote control. The LAMP indicator dims and the

 

cooling fans start to operate. The preparation display appears

 

on the screen and the countdown starts.

4

After the countdown, the input source that was selected the last

time and the Lamp control status icon (see page 57) appear on

the screen.

If the projector is locked with a PIN code, PIN code input dialog box will appear.

Note:

•When the Logo select function is set to Off, the logo will not be shown on the screen (p.52).

•When Countdown off or Off is selected in the Display function, the countdown will not be shown on the screen (p.52).

•When the Input button function is set to Mode 3, the input signal will be searched automatically (p.51).

•If you press the ON/STAND-BY button on the side control or the remote control during the countdown period, you can skip the countdown and go to the normal operations. In this case, however, the brightness of the image needs some time to stabilize after turning on the projector. The display may flicker after turning on the lamp for the characteristics of the lamp. This is normal operation and not a malfunction.

Enter a PIN code

Use the Point ▲▼ buttons on the side control or Number buttons on the remote control to enter a number.

When using side control

Use the Point ▲▼ buttons on the side control to select a number. Press the Point ► button to fix the number and move the red frame pointer to the next box. The number changes to . Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to “Set”. Press the SELECT button so that you can start to operate the projector.

When using remote control

Press the Number buttons on the remote control to enter a number (p.14). When you complete entering a four-digit number, the pointer moves to “Set”. Press the SELECT button so that you can start to operate the projector.

If you fixed an incorrect number, use the Point ◄ button to move the pointer to the number you want to correct, and then enter the correct number.

If you entered an incorrect PIN code, “PIN code” and the number () will turn red for a moment. Enter the correct PIN code all over again.

16

The preparation display will disappear after 30 seconds.

Selected Input Source and Lamp control

Input 1

RGB(PC analog)

Lamp control status

(See page 57 for Lamp control status.)

Note:

•The Lamp replacement icon and the Filter replacement or the Filter cartridge replacement icon may appear on the screen depending on the usage state of the projector.

•When the filter cartridge replacement icon keeps appearing on the screen at turning on the projector for some time and no action is taken to replace the filter cartridge, the projector will be automatically shut down in 3 minutes after turning on to protect the projector. (pp. 66-68, 81)

•When the Picture in Picture function is set to User 1-

5, User 1-5, Input source, Lamp control status, Lamp replacement icon and Filter warning icon will appear on the screen for 10 seconds.

PIN Code Input Dialog Box

After the OK icon disappears, you can operate the projector.

Note:

•If the PIN code number is not entered within three minutes after the PIN code dialog box appeared, the projector will be turned off automatically.

•The "1234" is set as the initial PIN code at the factory.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Network Supported Model PLC-WM5500 PLC-WM5500LFunctionally Rich Multilanguage Menu Display Features and DesignTable of Contents To The Owner Safety PrecautionSafety Instructions Top Panel Safety Instructions Air CirculationPositioning Precautions Safety Instructions Moving the Projector Compliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Back Bottom ⑱ Adjustable FeetPart Names and Functions FrontKensington Security Slot ⑮ USB Connector Series BPart Names and Functions Rear Terminal ① Infrared remote receiver BackPart Names and Functions Side Control and Indicators Part Names and Functions Remote Control ⑯ Input 1- 3 buttons ⑳ RESET/ON/ALL-OFF switch㉕ P-TIMER button ⑮ D..ZOOM buttonWired Remote Control Transmitter Remote Control Receivers and Operating RangeAdjustable Feet Part Names and Functions Remote Control CodePositioning the Projector InstallationLens Shift Adjustment Lens shift adjustable rangeRemoving the lens Installation Lens InstallationInstallation Connecting to a Computer Digital and Analog RGB Input Terminal Analog Out Signal TableInstallation Connecting for Audio Signal For the U..S..A.. and Canada For Continental Europe Installation Connecting the AC Power CordProjector side For the U..KTurning On the Projector When using side controlWhen using remote control Basic OperationTurning Off the Projector What is PIN code?Basic Operation On-Screen Menu Basic Operation How to Operate the On-Screen MenuRemote Control Basic Operation Menu Bar Side Control Basic Operation Operating with Projector ControlLens Operation Menu Operation Basic Operation Sound AdjustmentDirect Operation Information Menu Basic Operation Operating with Remote ControlAuto PC button Screen buttonFreeze button Timer buttonMouse Pointer button Pointer buttonCorner correction Basic Operation Keystone CorrectionStandard Click button Wireless Mouse OperationBasic Operation Pointer Function Dot Arrow FingerDirect Operation Side Control/Remote Control OperationRemote Control Operation Input SelectionRgbpc analog Input Selection Computer Input Source SelectionVideo Pb/Cb,Pr/Cr Input Selection Video Input Source SelectionRGBScart Selecting Computer System Manually Computer InputComputer System Selection Automatic Multi-Scan SystemAuto PC adj Computer Input Auto PC AdjustmentPC adjust Menu To store the adjusted parametersComputer Input Manual PC Adjustment Store ResetMode free Computer InputReal Image select MenuDynamic StandardImage adjust Menu Computer Input Image AdjustmentScreen Size Adjustment Position H/V Custom adjDigital zoom + Digital zoomKeystone Ceiling Rear Pb/Cb, Pr/Cr Jacks Video InputVideo System Selection Video Jack or S-video JackCinema Video InputDynamic NaturalTint Video Input Image AdjustmentColor Progressive StoreNoise reduction Natural Wide Video Input Screen Size AdjustmentCustom adj Wide169Ceiling Language SettingSetting Setting Menu Language Input buttonBackground Logo Logo and Logo PIN code lock settingsLogo select DisplayLogo PIN code lock Logo PIN code lockCapture Enter a Logo PIN code Change the Logo PIN code lock settingChange the Logo PIN code lock setting Enter a Logo PIN codePicture in Picture Sound Hdmi setupHdmi setup Lamp life control Lamp replacement iconLamp life control Lamp controlFan control Simple modeRemote control Filter controlRC sensor Power managementStandby mode Pointer TimerDirect on PIN code lock Security Key lock and PIN code lockKey lock PIN code change Change the PIN code lock settingEnter a PIN code Shutter CC3 or CC4 Video delay controlClosed caption Closed captionFilter counter Factory defaultFilter counter Test patternFilter Instructions Maintenance and CareRecommendation Maintenance and Care Replacing the Filter CartridgeScroll counter Reset? Maintenance and Care Resetting the Filter CounterResetting the Scroll Counter Filter counter Reset?Follow these steps to replace the lamp Maintenance and Care Lamp ReplacementMaintenance and Care Lamp Handling PrecautionsCleaning the Projector Cabinet Maintenance and Care Cleaning the Projection LensThen check the matters below Appendix TroubleshootingAppendix Indicators blink or light Power is turned offRemote Control does Wireless mouse functionComputer Input Appendix Menu TreeComputer Input/HDMI Input/Video Input Screen Hdmi Input/Video InputVideo Input ScreenSetting SettingProjector is operating normally Appendix Indicators and Projector ConditionIndicators Lamp Replace Projector is detecting abnormal conditionReplacement icon appears on the screen and the Warning Display Appendix Compatible Computer SpecificationsWSXGA+ Mechanical Information Appendix Technical SpecificationsPJ Link Notice Lens ReplacementTo the sales and service engineers Appendix Optional PartsOutput Appendix Configurations of TerminalsInput PIN Code Lock No Factory default set No 1 2 3Factory default set No 4 3 2 Appendix PIN Code Number MemoAppendix Dimensions Note Appendix List of Picture in PictureSerial Control Interface OperationFormat Functional Execution CommandEx. S1 = 12.3˚C, S2 = 23.4˚C, S3 = 34.5˚C Status Read CommandFormat KK8AL

PLC-WM5500, WM5500L specifications

The Sanyo WM5500L, also known as PLC-WM5500, is a high-performance projector designed to deliver exceptional image quality and versatility for various applications, including business presentations, educational use, and home entertainment. This projector integrates cutting-edge technology with user-friendly features, making it a popular choice among professionals and casual users alike.

One of the standout features of the Sanyo WM5500L is its impressive brightness. With a brightness rating of 5000 ANSI lumens, this projector is capable of delivering clear and vivid images, even in well-lit environments. This makes it an ideal choice for large venues such as auditoriums, conference rooms, and classrooms, where ambient light can be a challenge. The high brightness level ensures that images remain sharp and easy to read, regardless of the lighting conditions.

The projector employs advanced LCD technology, which is known for producing true-to-life colors and excellent contrast ratios. The Sanyo WM5500L features a resolution of 1024 x 768 pixels (XGA), providing a good balance between image detail and performance. The combination of high brightness and effective color reproduction makes it suitable for displaying presentations, videos, and images with a high degree of clarity and vibrancy.

Another notable characteristic of the WM5500L is its connectivity options. The projector is equipped with multiple input terminals, including HDMI, VGA, and composite video, allowing users to connect various devices such as laptops, Blu-ray players, and gaming consoles easily. This versatility ensures compatibility with a wide range of audio-visual equipment, making it an excellent choice for diverse usage scenarios.

In addition to its excellent image quality and connectivity, the Sanyo WM5500L is designed with user convenience in mind. It features adjustable lens shift capabilities, ensuring that users can position the projector flexibly without compromising image quality. The built-in 10-watt speaker enhances the audio experience, making it suitable for presentations that require accompanying sound without the need for external speakers.

Finally, the reliable durability of the Sanyo WM5500L, coupled with its energy-efficient design, ensures that users enjoy a long-lasting, cost-effective projection solution. Overall, the Sanyo WM5500L (PLC-WM5500) stands out in the market as a powerful, reliable projector that meets the diverse needs of its users, combining advanced technology, high-quality imaging, and ease of use. This projector is undoubtedly a valuable addition to any professional or educational setting.
Top Page Image Contents