Video Input
Video System Selection
1 | Press the MENU button to display the | AV System Menu (Video or |
the Point ▲▼ buttons to select Input and then press the Point | ||
| ► or the SELECT button. |
|
2 | Use the Point ▲▼ buttons to select System and then press the |
|
Point ► or the SELECT button. |
| |
3 | Use the Point ▲▼ buttons to select the desired system and |
|
then press the SELECT button. |
|
Video Jack or S-video Jack
Auto
The projector automatically detects an incoming video system, and adjusts itself to optimize its performance.
When Video System is
PAL/SECAM/NTSC/NTSC4..43/PAL-M/PAL-N
If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4..43,
Y, Pb/Cb, Pr/Cr Jacks
Auto | AV System Menu (Y, Pb/Cb, Pr/Cr) |
The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.
When the Video System is 1035i, 1080i or 1080p, select the system manually.
Y, Pb/Cb, Pr/Cr SIGNAL FORMAT
If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, 1080i, and 1080p.
Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).
45