Sanyo WM5500L, PLC-WM5500 Closed caption, Video delay control, CC3 or CC4, Color to White Note

Setting

Closed caption

Closed caption is a printed version of the program sound or other	Closed caption
information displayed on the screen. If the input signal contains
Closed captions, you can turn on the feature and switch the
channels. Press the Point ▲▼ buttons to select Off, CC1, CC2,
CC3 or CC4.
If the Closed caption is not clear, you can change the text from
Color to White.

Note:

The Closed caption is available only under the situation below.

•When the input signal is NTSC of composite and S-video, and the system is set according to the signal or set on Auto.

•The system must be set on NTSC or Auto in Video System Selection. (p.45)

•The item of Closed caption is displayed in gray while it is not available.

•Closed caption is unavailable when On-Screen Menu and P-timer are displayed.

Video delay control

When you want to make a digital processing of a projected image faster, set this function.

Use the Point ▲▼ buttons, select an item of Off/Low/Mid/High. Digital processing speed becomes fast by order of Low → Mid →

High. High is the fastest.

Note:

Press the Point ▲▼ buttons to select Off, CC1, CC2, CC3 or CC4, and then Press Select button.

-The following functions are not available respectively when Video delay control is set to Low/Mid/High.

Low ...	Keystone can not be selected.
Mid ...	Progressive and Noise reduction can not be selected.	Fig..1
High ...	Keystone, Progressive and Noise reduction can not

be selected.
-When Video delay control function is set to Low or High and press the
KEYSTONE button on the remote control, Fig.1 will be dispalyed on the	Video delay : On
bottom left screen.

64