Sanyo POA-PN10 owner manual Configure the network, Name the projector

Page 31

Network Configuration

Network Configuration

Click on the Network Setting linked text on the main menu. The following setting page is displayed. This page is to set the IP Address, Subnet Mask,

Default gateway, DNS (Domain Name Server) and projector name.

1 Configure the network

The IP address and Subnet Mask have been configured already in chapter “Installation”. If you want to change them or configure default gateway*1 or DNS*2, perform them in this page. Enter an applicable address number onto each parameter and press the Set button.

The Network Unit begins restarting and it takes about 40 seconds. Close (Quit) the web browser and access to the login page again in 40 seconds.

✐You must use the number specified by your administrator. The address must be entered as a group with four numbers split by dots like [192.168.1.101].

2 Name the projector

You can name*3 the projector. By setting this name properly for the DNS server, the projector can be accessed by using this name instead of the IP address.

For further information, please consult your network administrator.

ENGLISH

*1 Set [0.0.0.0] if the network does not provide the gateway (router).

*2 Set [0.0.0.0] if you do not use the function E-Mail alert.

*3 If you use the DNS server, register the host name registered to the DNS server as a projec- tor name. You can access with this projector name from any computers in your network. If you do not use the DNS server, access with the assigned IP address to the projector.

Network Unit

OWNER’S MANUAL

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Model No. POA-PN10 PJ-Net OrganizerFederal Communication Commission Notice CompliancesTrademark Use of this manual Expression/AbbreviationContents Use of Serial Port Mail Alert function FeaturesPower on Web Management functionMulti-control function Automatic On/Off using Timer functionControl port ready for external equipment via network Operating Environment Installation Check package p.11 Installation p.12-14 Installation Flow of installationName and function of each part Coin etc MountingConnection of LAN cable Confirmation of network menu activity Confirmation of network setting menu NetworkTurn on the projector and display the menu on the screen Procedure of Connecting the projector to the network Network configurationSelection of network menu Network Configure the network with the projectorRestart the Network Unit How to enter the numbersConfigure the network with the computer Completing of installation Windows 98/95/Me Configure the network of computerWindows 2000/NT4.0 Windows XP Macintosh Installation Basic Setting and Operation Enter the IP address Basic Setting and OperationLogin or logout the setting page of the projector LoginDisplay of main setting Language Setting Initial SettingsLogout Password Setting Date/Time SettingTemperature unit setting Name the projector Configure the networkRegistering and delet Ing E-mail addresses Mail SettingAdministrator Address Smtp Server*1Examples Type and contents of alert mail When the life span of lamp is reached When the internal power circuit is failedWhen the lamp use time reaches preselect lamp use time Controlling the Projector Controlling the Projector Power on/off the projector Check the status of projector Input Control the projectorPC Adjustment System Adjustment Image Adjustment Sound Adjustment Screen AdjustmentSetting Setting items and their operations are listed below Select an event on or OFF How to set the TimerSelect a day or date Select timeGetting the current time Cancel the timerService Name the current setting Save Actual AdjustmentAdjust and set the controls Display the current setting informationTo load the control set Control the projectors menuControlling the Projector Controlling the Multi-Projectors Register IP address and projector name Controlling the Multi-Projectors Multi-ControlAdd all of listed projectors into multi-control Exclude/Add the projectors from/into the multi-controlDelete from the multi-control list Control multi-projectors at the same time Load and apply the setting valueStatus Selection of another projector Use of Serial Port Use of Serial Port Serial port settingSerial controller Example Control ExamplesSerial Controller Control Use of TelnetWhen the word Hello is replied, login has been successful Control the projector with Telnet Command list tableAppendixA Connection examples Web browser setting Technical dataPeer-To-Peer connection Examples of ConnectionTheater Gateway Router installed in the networkProxy setting Web browser settingCookies enable Active Script/JavaScript enableWindows 95/98 Setting examples OS/BrowsersInternet Explorer Cookies setting ActiveScript settingProxy setting JavaScript Setting Netscape Navigator Cookies settingProxy setting Mac OS Proxy setting Netscape Navigator Cookies setting Proxy setting Applicable projector model list Product specificationLAN port specification Port SpecificationSerial port specification HDB 15-pin connector VGA Computer Input port specificationAppendix FAQ FAQ How can I restrict access from the computer Password/Login What should I do when I forget the password? English You can register up to 10 addresses Can I update the firmware of the Network Unit Why am I not receiving E-mail alert messages?What are the rules for IP address assignment? What is the MAC address assigned to the Network Unit?English Part No.610 306 1474 1AA6P1P3990-- Idlb

POA-PN10 specifications

The Sanyo POA-PN10 is a premium replacement lamp designed for select Sanyo projectors, particularly the PLC-XF47, PLC-XF48, and PLC-XF70 models. This high-quality lamp is engineered specifically to maintain the performance of these projectors, ensuring that users can enjoy vibrant and clear visuals in various lighting conditions.

One of the primary features of the Sanyo POA-PN10 is its high brightness output, measured at approximately 4000 ANSI lumens. This impressive figure allows the projector to deliver bright images, making it suitable for both small and large venues, including classrooms, conference rooms, and auditoriums. Coupled with a contrast ratio of up to 2000:1, users can expect deep blacks and vivid colors that enhance the overall viewing experience.

The POA-PN10 lamp utilizes high-pressure mercury technology to produce its luminous output. This technology is known for its energy efficiency and extended lifespan, typically lasting between 2000 to 3000 hours, depending on usage and operating conditions. Users can extend the life of the lamp by utilizing eco-mode settings, which reduce power consumption and heat generation.

In addition to brightness and efficiency, the Sanyo POA-PN10 is designed for easy installation and replacement. With a user-friendly design, it allows users to quickly swap out the old lamp with minimal disruption, ensuring that presentations and meetings can continue smoothly without extended downtime.

Another noteworthy characteristic of the Sanyo POA-PN10 is its high-quality construction. It is designed to meet strict performance standards, minimizing the risk of failure during critical presentations. Additionally, the lamp is rigorously tested for compatibility with Sanyo projectors, assuring users of optimal performance and reliability.

In summary, the Sanyo POA-PN10 stands out as an essential component for enhancing the capabilities of Sanyo projectors. With its high brightness output, energy-efficient design, and ease of use, it caters to the needs of both professional environments and educational settings. Users can expect longevity and quality, making this lamp a worthwhile investment for organizations looking to achieve superior visual presentations.
Top Page Image Contents