Sanyo POA-PN10 owner manual Serial controller

Page 59

Serial port setting

Setting to control the equipment connected to the serial port from the computer

Serial Control :Selects “External”

Port:Sets according to the com- puter specified port no. Do not use port no. 10000*2.

Other Settings :Sets according to the com- munication condition of the equipment

Setting to control the projector from the serial controller con- nected to the serial port

Serial Control :Selects “Projector”

Port:Not specified. Do not use port no. 10000*2.

Other Settings :Sets according to the com- munication condition of

the serial controller

Setting to control the projector from the computer through the LAN port

Serial Control

:Not specified

Port

:Not specified

Other Settings

:Not specified

* The port no. of the computer must be used with 10000.

*1 This product will restart automatically when the “Port” or “Serial Control” is changed and it takes about 40 seconds.

*2 The reserved port numbers are http (80), ftp (21), telnet (23), etc. The port no. 10000 is reserved to control the projector through the LAN port.

✐Exclusive driver software for control of the external equipment is required. This product does not provide any driver software. Please consult your local dealer.

✐There are 2 types of RS-232C serial cable, Normal and Reverse type. Usually, when connect- ing between this product and a projector or a computer, use Reverse type of serial cable. When connecting DVD player etc., use Normal type.

Network Unit

OWNER’S MANUAL

ENGLISH

59

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Model No. POA-PN10 PJ-Net OrganizerTrademark CompliancesFederal Communication Commission Notice Use of this manual Expression/AbbreviationContents Use of Serial Port Mail Alert function FeaturesPower on Web Management functionControl port ready for external equipment via network Automatic On/Off using Timer functionMulti-control function Operating Environment Installation Check package p.11 Installation p.12-14 Installation Flow of installationName and function of each part Coin etc MountingConnection of LAN cable Turn on the projector and display the menu on the screen Confirmation of network setting menu NetworkConfirmation of network menu activity Procedure of Connecting the projector to the network Network configurationSelection of network menu Network Configure the network with the projectorRestart the Network Unit How to enter the numbersConfigure the network with the computer Completing of installation Windows 98/95/Me Configure the network of computerWindows 2000/NT4.0 Windows XP Macintosh Installation Basic Setting and Operation Enter the IP address Basic Setting and OperationLogin or logout the setting page of the projector LoginDisplay of main setting Logout Initial SettingsLanguage Setting Password Setting Date/Time SettingTemperature unit setting Name the projector Configure the networkRegistering and delet Ing E-mail addresses Mail SettingAdministrator Address Smtp Server*1Examples Type and contents of alert mail When the lamp use time reaches preselect lamp use time When the internal power circuit is failedWhen the life span of lamp is reached Controlling the Projector Controlling the Projector Power on/off the projector Check the status of projector Input Control the projectorPC Adjustment System Adjustment Image Adjustment Sound Adjustment Screen AdjustmentSetting Setting items and their operations are listed below Select an event on or OFF How to set the TimerSelect a day or date Select timeGetting the current time Cancel the timerService Name the current setting Save Actual AdjustmentAdjust and set the controls Display the current setting informationTo load the control set Control the projectors menuControlling the Projector Controlling the Multi-Projectors Register IP address and projector name Controlling the Multi-Projectors Multi-ControlDelete from the multi-control list Exclude/Add the projectors from/into the multi-controlAdd all of listed projectors into multi-control Control multi-projectors at the same time Load and apply the setting valueStatus Selection of another projector Use of Serial Port Use of Serial Port Serial port settingSerial controller Example Control ExamplesSerial Controller Control Use of TelnetWhen the word Hello is replied, login has been successful Control the projector with Telnet Command list tableAppendixA Connection examples Web browser setting Technical dataPeer-To-Peer connection Examples of ConnectionTheater Gateway Router installed in the networkProxy setting Web browser settingCookies enable Active Script/JavaScript enableWindows 95/98 Setting examples OS/BrowsersInternet Explorer Cookies setting ActiveScript settingProxy setting JavaScript Setting Netscape Navigator Cookies settingProxy setting Mac OS Proxy setting Netscape Navigator Cookies setting Proxy setting Applicable projector model list Product specificationSerial port specification Port SpecificationLAN port specification HDB 15-pin connector VGA Computer Input port specificationAppendix FAQ FAQ How can I restrict access from the computer Password/Login What should I do when I forget the password? English You can register up to 10 addresses Can I update the firmware of the Network Unit Why am I not receiving E-mail alert messages?What are the rules for IP address assignment? What is the MAC address assigned to the Network Unit?English Part No.610 306 1474 1AA6P1P3990-- Idlb

POA-PN10 specifications

The Sanyo POA-PN10 is a premium replacement lamp designed for select Sanyo projectors, particularly the PLC-XF47, PLC-XF48, and PLC-XF70 models. This high-quality lamp is engineered specifically to maintain the performance of these projectors, ensuring that users can enjoy vibrant and clear visuals in various lighting conditions.

One of the primary features of the Sanyo POA-PN10 is its high brightness output, measured at approximately 4000 ANSI lumens. This impressive figure allows the projector to deliver bright images, making it suitable for both small and large venues, including classrooms, conference rooms, and auditoriums. Coupled with a contrast ratio of up to 2000:1, users can expect deep blacks and vivid colors that enhance the overall viewing experience.

The POA-PN10 lamp utilizes high-pressure mercury technology to produce its luminous output. This technology is known for its energy efficiency and extended lifespan, typically lasting between 2000 to 3000 hours, depending on usage and operating conditions. Users can extend the life of the lamp by utilizing eco-mode settings, which reduce power consumption and heat generation.

In addition to brightness and efficiency, the Sanyo POA-PN10 is designed for easy installation and replacement. With a user-friendly design, it allows users to quickly swap out the old lamp with minimal disruption, ensuring that presentations and meetings can continue smoothly without extended downtime.

Another noteworthy characteristic of the Sanyo POA-PN10 is its high-quality construction. It is designed to meet strict performance standards, minimizing the risk of failure during critical presentations. Additionally, the lamp is rigorously tested for compatibility with Sanyo projectors, assuring users of optimal performance and reliability.

In summary, the Sanyo POA-PN10 stands out as an essential component for enhancing the capabilities of Sanyo projectors. With its high brightness output, energy-efficient design, and ease of use, it caters to the needs of both professional environments and educational settings. Users can expect longevity and quality, making this lamp a worthwhile investment for organizations looking to achieve superior visual presentations.
Top Page Image Contents