Sanyo POA-PN10 owner manual You can register up to 10 addresses

Page 86

Appendix

Operation

QWhy can't I change the controls in the setting page with web browser?

APlease make sure the projector is turned on. If it is in the standby mode, the setting is not effective to the projector. To control the projector with a web

browser, the projector must be in the powered-on condition. Also, projectors registered for multi-control cannot have any controls changed if they are in standby mode. But timer and clock settings are always effective, even for pro- jectors in standby mode.

QWhy does it sometimes take a lot of time to complete the page dis- play?

AThe display speed of the page depends on the network environment in which both the projector and computer are placed. It may take much time to complete

the page display if network traffic is heavy. Please consult your network admin- istrator. By changing the preference of your web browser to “not show pic- tures”, you may have page display more quickly at the heavy network traffic. Please see the browser’s on-line help for further information.

QI use many of the projectors in the network. How can I use names of the projectors to recognize each projector instead of IP addresses?

AYou can manage the projectors with nicknames instead of the IP address. Please see chapter “Controlling the Multi-Projectors” for further information.

(p.51)

By registering the projector name and IP address with the DNS server, it can be accessed with the nickname from the any computer referred to the DNS serv- er. Please consult your network administrator (p.31, 52).

QHow many numbers of the E-mail address can I register in the E- mail setting page.

AYou can register up to 10 addresses.

86

Page 85 Page 87
Image 86
Page 85 Page 87
Contents PJ-Net Organizer Model No. POA-PN10Trademark CompliancesFederal Communication Commission Notice Expression/Abbreviation Use of this manualContents Use of Serial Port Web Management function FeaturesPower on Mail Alert functionControl port ready for external equipment via network Automatic On/Off using Timer functionMulti-control function Operating Environment Installation Installation Flow of installation Check package p.11 Installation p.12-14Name and function of each part Mounting Coin etcConnection of LAN cable Turn on the projector and display the menu on the screen Confirmation of network setting menu NetworkConfirmation of network menu activity Network configuration Procedure of Connecting the projector to the networkConfigure the network with the projector Selection of network menu NetworkHow to enter the numbers Restart the Network UnitConfigure the network with the computer Completing of installation Configure the network of computer Windows 98/95/MeWindows 2000/NT4.0 Windows XP Macintosh Installation Basic Setting and Operation Login Basic Setting and OperationLogin or logout the setting page of the projector Enter the IP addressDisplay of main setting Logout Initial SettingsLanguage Setting Date/Time Setting Password SettingTemperature unit setting Configure the network Name the projectorSmtp Server*1 Mail SettingAdministrator Address Registering and delet Ing E-mail addressesExamples Type and contents of alert mail When the lamp use time reaches preselect lamp use time When the internal power circuit is failedWhen the life span of lamp is reached Controlling the Projector Controlling the Projector Power on/off the projector Check the status of projector Control the projector InputPC Adjustment System Adjustment Image Adjustment Screen Adjustment Sound AdjustmentSetting Setting items and their operations are listed below Select time How to set the TimerSelect a day or date Select an event on or OFFCancel the timer Getting the current timeService Display the current setting information Save Actual AdjustmentAdjust and set the controls Name the current settingControl the projectors menu To load the control setControlling the Projector Controlling the Multi-Projectors Controlling the Multi-Projectors Multi-Control Register IP address and projector nameDelete from the multi-control list Exclude/Add the projectors from/into the multi-controlAdd all of listed projectors into multi-control Load and apply the setting value Control multi-projectors at the same timeStatus Selection of another projector Use of Serial Port Serial port setting Use of Serial PortSerial controller Control Examples ExampleSerial Controller Use of Telnet ControlWhen the word Hello is replied, login has been successful Command list table Control the projector with TelnetConnection examples Web browser setting Technical data AppendixAExamples of Connection Peer-To-Peer connectionGateway Router installed in the network TheaterActive Script/JavaScript enable Web browser settingCookies enable Proxy settingActiveScript setting Setting examples OS/BrowsersInternet Explorer Cookies setting Windows 95/98Proxy setting Netscape Navigator Cookies setting JavaScript SettingProxy setting Mac OS Proxy setting Netscape Navigator Cookies setting Proxy setting Product specification Applicable projector model listSerial port specification Port SpecificationLAN port specification Computer Input port specification HDB 15-pin connector VGAAppendix FAQ FAQ How can I restrict access from the computer Password/Login What should I do when I forget the password? English You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I update the firmware of the Network UnitWhat is the MAC address assigned to the Network Unit? What are the rules for IP address assignment?English Part No.610 306 1474 1AA6P1P3990-- Idlb

POA-PN10 specifications

The Sanyo POA-PN10 is a premium replacement lamp designed for select Sanyo projectors, particularly the PLC-XF47, PLC-XF48, and PLC-XF70 models. This high-quality lamp is engineered specifically to maintain the performance of these projectors, ensuring that users can enjoy vibrant and clear visuals in various lighting conditions.

One of the primary features of the Sanyo POA-PN10 is its high brightness output, measured at approximately 4000 ANSI lumens. This impressive figure allows the projector to deliver bright images, making it suitable for both small and large venues, including classrooms, conference rooms, and auditoriums. Coupled with a contrast ratio of up to 2000:1, users can expect deep blacks and vivid colors that enhance the overall viewing experience.

The POA-PN10 lamp utilizes high-pressure mercury technology to produce its luminous output. This technology is known for its energy efficiency and extended lifespan, typically lasting between 2000 to 3000 hours, depending on usage and operating conditions. Users can extend the life of the lamp by utilizing eco-mode settings, which reduce power consumption and heat generation.

In addition to brightness and efficiency, the Sanyo POA-PN10 is designed for easy installation and replacement. With a user-friendly design, it allows users to quickly swap out the old lamp with minimal disruption, ensuring that presentations and meetings can continue smoothly without extended downtime.

Another noteworthy characteristic of the Sanyo POA-PN10 is its high-quality construction. It is designed to meet strict performance standards, minimizing the risk of failure during critical presentations. Additionally, the lamp is rigorously tested for compatibility with Sanyo projectors, assuring users of optimal performance and reliability.

In summary, the Sanyo POA-PN10 stands out as an essential component for enhancing the capabilities of Sanyo projectors. With its high brightness output, energy-efficient design, and ease of use, it caters to the needs of both professional environments and educational settings. Users can expect longevity and quality, making this lamp a worthwhile investment for organizations looking to achieve superior visual presentations.
Top Page Image Contents