Sanyo POA-PN10 owner manual Use of Serial Port, Serial port setting

Page 58

Use of Serial Port

This product provides with a serial control port (RS-232C) to control the external equipment which has an RS-232C port. This function allows exter- nal equipment to be controlled by the computer through the network and the projector can be controlled by the external serial controller. Before con-

necting the external equipment, perform the setting “Serial port setting” described below.

Serial port setting

Set up the extra serial port of this product. Click on the Extra Serial Port Setting linked text on the main menu and the following setting page will be displayed. To communicate with external equipment correctly, software communication conditions must be set to the same values as that the connected equipment is using. After fix- ing the setting, press the Set button*1. Enter your note into the comment column and press the Save button.

58

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Setting Items

Description

 

 

 

Baud Rate

Communication speed for serial port, select with pull down menu button.

Parity

Parity check, the ways for errors detecting of transferred data.

Stop

Stop bit, indicates the end of communication.

Flow Control

Ways for communication flow.

Data

Indicates the length of data.

Serial Control

Selects equipment to control

 

 

External........Used to select when the external equipment connected to the

 

 

serial port is controlled by the computer through the LAN port.

 

 

Projector ......Used to select when the projector is controlled by the serial con-

 

 

troller connected to the serial port.

Port

Indicates the port number of TCP/IP. The default number is 23. Use the

 

 

same port number specified by application. There are some reserved port

 

 

number*2. If one of those port numbers is used, the alert dialog window will

 

 

appear and let you know that it is an invalid port number.

 

 

 

 

 

Page 57 Page 59
Image 58
Page 57 Page 59
Contents PJ-Net Organizer Model No. POA-PN10Federal Communication Commission Notice CompliancesTrademark Expression/Abbreviation Use of this manualContents Use of Serial Port Web Management function FeaturesPower on Mail Alert functionMulti-control function Automatic On/Off using Timer functionControl port ready for external equipment via network Operating Environment Installation Installation Flow of installation Check package p.11 Installation p.12-14Name and function of each part Mounting Coin etcConnection of LAN cable Confirmation of network menu activity Confirmation of network setting menu NetworkTurn on the projector and display the menu on the screen Network configuration Procedure of Connecting the projector to the networkConfigure the network with the projector Selection of network menu NetworkHow to enter the numbers Restart the Network UnitConfigure the network with the computer Completing of installation Configure the network of computer Windows 98/95/MeWindows 2000/NT4.0 Windows XP Macintosh Installation Basic Setting and Operation Login Basic Setting and OperationLogin or logout the setting page of the projector Enter the IP addressDisplay of main setting Language Setting Initial SettingsLogout Date/Time Setting Password SettingTemperature unit setting Configure the network Name the projectorSmtp Server*1 Mail SettingAdministrator Address Registering and delet Ing E-mail addressesExamples Type and contents of alert mail When the life span of lamp is reached When the internal power circuit is failedWhen the lamp use time reaches preselect lamp use time Controlling the Projector Controlling the Projector Power on/off the projector Check the status of projector Control the projector InputPC Adjustment System Adjustment Image Adjustment Screen Adjustment Sound AdjustmentSetting Setting items and their operations are listed below Select time How to set the TimerSelect a day or date Select an event on or OFFCancel the timer Getting the current timeService Display the current setting information Save Actual AdjustmentAdjust and set the controls Name the current settingControl the projectors menu To load the control setControlling the Projector Controlling the Multi-Projectors Controlling the Multi-Projectors Multi-Control Register IP address and projector nameAdd all of listed projectors into multi-control Exclude/Add the projectors from/into the multi-controlDelete from the multi-control list Load and apply the setting value Control multi-projectors at the same timeStatus Selection of another projector Use of Serial Port Serial port setting Use of Serial PortSerial controller Control Examples ExampleSerial Controller Use of Telnet ControlWhen the word Hello is replied, login has been successful Command list table Control the projector with TelnetConnection examples Web browser setting Technical data AppendixAExamples of Connection Peer-To-Peer connectionGateway Router installed in the network TheaterActive Script/JavaScript enable Web browser settingCookies enable Proxy settingActiveScript setting Setting examples OS/BrowsersInternet Explorer Cookies setting Windows 95/98Proxy setting Netscape Navigator Cookies setting JavaScript SettingProxy setting Mac OS Proxy setting Netscape Navigator Cookies setting Proxy setting Product specification Applicable projector model listLAN port specification Port SpecificationSerial port specification Computer Input port specification HDB 15-pin connector VGAAppendix FAQ FAQ How can I restrict access from the computer Password/Login What should I do when I forget the password? English You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I update the firmware of the Network UnitWhat is the MAC address assigned to the Network Unit? What are the rules for IP address assignment?English Part No.610 306 1474 1AA6P1P3990-- Idlb

POA-PN10 specifications

The Sanyo POA-PN10 is a premium replacement lamp designed for select Sanyo projectors, particularly the PLC-XF47, PLC-XF48, and PLC-XF70 models. This high-quality lamp is engineered specifically to maintain the performance of these projectors, ensuring that users can enjoy vibrant and clear visuals in various lighting conditions.

One of the primary features of the Sanyo POA-PN10 is its high brightness output, measured at approximately 4000 ANSI lumens. This impressive figure allows the projector to deliver bright images, making it suitable for both small and large venues, including classrooms, conference rooms, and auditoriums. Coupled with a contrast ratio of up to 2000:1, users can expect deep blacks and vivid colors that enhance the overall viewing experience.

The POA-PN10 lamp utilizes high-pressure mercury technology to produce its luminous output. This technology is known for its energy efficiency and extended lifespan, typically lasting between 2000 to 3000 hours, depending on usage and operating conditions. Users can extend the life of the lamp by utilizing eco-mode settings, which reduce power consumption and heat generation.

In addition to brightness and efficiency, the Sanyo POA-PN10 is designed for easy installation and replacement. With a user-friendly design, it allows users to quickly swap out the old lamp with minimal disruption, ensuring that presentations and meetings can continue smoothly without extended downtime.

Another noteworthy characteristic of the Sanyo POA-PN10 is its high-quality construction. It is designed to meet strict performance standards, minimizing the risk of failure during critical presentations. Additionally, the lamp is rigorously tested for compatibility with Sanyo projectors, assuring users of optimal performance and reliability.

In summary, the Sanyo POA-PN10 stands out as an essential component for enhancing the capabilities of Sanyo projectors. With its high brightness output, energy-efficient design, and ease of use, it caters to the needs of both professional environments and educational settings. Users can expect longevity and quality, making this lamp a worthwhile investment for organizations looking to achieve superior visual presentations.
Top Page Image Contents